Device Configuration App (DCA) for IPAS DALIControl e64
Order No.: 4101-145-01
Application: DaliControl e64-01-0310

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Device Configuration App (DCA) for IPAS DALIControl gc16 (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-01-0110, DaliControl gc16-2-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

For full system visualisation, telegrams shall be allowed to pass the line coupler. To this end, a dummy device is inserted in the ETS project. It contains all the Group Addresses required by the visualisation system. The ETS takes the Group Addresses from the dummy device into account when creating the filter tables.

Fill VisualizationDummy helps you to link a dummy device in the ETS with a list of Group Addresses for a visualization.
Product data for dummy devices can be obtained from several manufacturers.

The information about the group addresses can be read either from a file (different formats are supported), or the group addresses can be selected from the current ETS4 project by drag and drop.

Shift Addresses helps you to re-structure Group Addresses and Individual Addresses in an ETS project, e.g.
- Shift addresses to make room for a new function but still keep an established addressing scheme
- Create gaps between addresses to allow for future extensions or to produce a clean and logical addressing scheme

The Reconstruction tool can be used to read out devices in the installation and then create a new ETS project or update an existing project. You may also compare the data from the installation against an ETS project.
This allows to work on projects where the ETS database has been lost or is out of date. This will also work for installations which were created with a previous version of ETS.

These items can be reconstructed: topology, devices with individual address, application program, parameter settings and group object flags, priority and assigned group addresses. You need bus access and same product data which were used to program the devices.
Building or trade structure as well as name and description texts of areas, lines, devices and group addresses will not be reconstructed because they were not programmed into the device.

Note: Devices with plug-ins can only be read out / reconstructed, if supported by the manufacturer of the plug-ins. In case of doubt please contact the manufacturer or our support.
Devices which product data cannot be used in the current ETS can not be reconstructed.

For more info see http://www.it-gmbh.de Products - KNX-Software - ETS Apps