With the ETS App Replace Device, you can replace KNX devices while keeping their Group Addresses. This is possible for devices with similar functionality, regardless of the manufacturer.
Area of application:
Devices can be maintained comfortably using the Siegenia / KFV ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Scope:
Feller's ETS service app provides users with a convenient way to maintain devices. New firmware can be installed onto existing devices. Furthermore, it is also possible to transfer older firmware versions to existing devices (for example, when replacing your device).
The ETS programming interface is used during the firmware programming process. The app supports all KNX media (TP, IP, RF).
https://www.feller.ch
Shift Addresses helps you to re-structure Group Addresses and Individual Addresses in an ETS project, e.g.
- Shift addresses to make room for a new function but still keep an established addressing scheme
- Create gaps between addresses to allow for future extensions or to produce a clean and logical addressing scheme
The current app version works only from ETS 5.7.2! The app is available for ETS6.
Users can program the individual address of a KNX device by using the KNX serial number. Siemens offers selected products with removable labels printed with the unique KNX serial number on. In practical work the installer of a KNX device can fix the label to the device in the installation plan. So later on the ETS expert can program the KNX device without pressing the programming button. Therefore the KNX serial number is labeled as bar-code, it is possible to use a bar-code scanner.
The Siemens Channel Multiplier App allows the transfer of parameters from one channel to one or more other channels between products included in an ETS project. The user defines one channel of a product as the reference channel and determines all identical channels to be parameterized identically. Changes in the reference channel will automatically be copied to the selected identical channels.
o Device Configuration App (DCA) for SIEMENS KNX/DALI Gateways N 141/14 & N 141/32
o Order nr.: 5WG1141-1AB14, 5WG1141-1AB32
o The fully ETS-integrated Device Configuration App (DCA), which complements the standard parameter dialog, is used for DALI commissioning and DALI testing with the KNX/DALI Gateways N 141/14 and N 141/32. This allows for the identification, addressing, and assignment of DALI operating devices and DALI-2 sensors using the familiar ETS environment, without needing additional software besides ETS.
o For more information about DCA installation, please refer to the application program description on https://www.siemens.com/knx-td
Siemens offers the possibility to exchange data from SIMATIC S7 PLC to KNX systems via KNXnet/IP interfaces. This ETS App enables the user to export a Group Address data (Main addresses 0-15) from ETS in a CSV file which can be imported to Siemens KNX2S7 Editor. The additional available KNX2S7 Editor creates required data for SIMATIC S7.
The Tahoma KNX Configurator allows installers to generate an export file to be uploaded to the Somfy TaHoma platform. The user of the KNX installation will then able to control his KNX environment through the Somfy TaHoma web and mobile applications, and the TaHoma DIN rail box.
The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.