Shop

This application enables advanced configuration and commissioning of the DALI ballasts with the Zennio DALI-BOX Interface v2.

Device Configuration App (DCA) for IPAS DALIControl gc16 (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-01-0110, DaliControl gc16-2-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

TheKNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

The KNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

DCA for commissioning the MDT DaliControl Gateway DALI16 or the MDT DaliControlGateway32.
This DCA can be used to commission and configure the DALI devices. The DALI subscribers can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Device Configuration App (DCA) for IPAS DALIControl e64
Order No.: 4101-145-01
Application: DaliControl e64-01-0310

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

DCA for commissioning the MDT DaliControl Gateway SCN-DALI64.03.
This DCA can be used for commissioning and configuration of the DALI devices. The DALI devices can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The KNX DALI-Gateway REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

The KNX DALI-Gateway REG-K/IP1 is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

This ETS-APP is a tool that allows updating the operating system of some KNX Zennio devices through ETS without having to send them to the factory.

The OS update does not involve a change of functionality or version of the ETS application program, but updates a lower memory layer.
These updates are usually not necessary throughout the lifetime of the product unless there is a behaviour that cannot be changed with a new version of the application program via ETS.
In case you need to use this APP, our support team will have provided you with the necessary files (.bin).
Download the App manual: https://www.zennio.com/download/manual_fw_updater_en

If you want to update the ETS application program version, you can copy parameters and object links using the Zennio Parameter Copier application, also available in the KNX online shop.

A plugin of configuration DALI bus deveice by KNX bus

Device Configuration App (DCA) for IPAS DALIControl e64 Pro
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Device Configuration App (DCA) for IPAS DALIControl gc16plus (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-1 Plus_V1.1.0, DaliControl gc16-2 Plus_V1.1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The SpaceLogic KNX DALI-Gateway Basic Plus is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

The ETS App “Zennio Parameter Copier” is a tool which helps in the versions update process of Zennio products. This tool allows to copy parameters and group objects associations between different products versions, making the updating process faster.
Download the App manual:
https://zennio.com/download/manual_parameter_copier_en

Attention:

This tool is a beta application version which has been published to facilitate maintenance and updating tasks to Zennio clients.

The copy could not work properly since it depends on the internal application program construction, which can vary between versions just a little bit or a lot, so it is highly recommended to double check it to verify that the copy process has been successful.

DALI Gateway IC01D01DAL DCA
DALI Gateway IC02D01DAL DCA

Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2

Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.

Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

A plugin of configuration DALI bus device by KNX bus

A plug-in of configuration DALI bus device of KNX

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

A plugin of configuration DALI bus device by KNX bus

Blumotix s.r.l.
Device Configuration App (dca) for BX-DALI-PLUS (AV06)
Order number: BX-DALI-PLUS
Application: BX-DALI-PLUS (AV06)
Device configuration DCA for the dali bus definition. The application is used to configure only DT6 dali devices, first enumeration, post-installation, groups and scenes.

Device Configuration App (DCA) for Gewiss GW90873 - Gateway KNX/DALI 64/16 advanced

Dali gateway is used to connect Dali devices via KNX ETS-APP.

Device Configuration App (DCA) for IPAS DALIControl e64 Pro V2
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro_V2.1.0

Support of Input Devices
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This Gira Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the Gira DALI Gateway Colour (order number 2111 00, 2112 00). This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software beyond the ETS.

To carry out the DALI commissioning and the DALI test to the DALI-2 Gateway Colour this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Device Configuration App (DCA) for Ekinex KNX/DALI gateway EK-BF1-TP-D1 (1 channel) or EK-BF1-TP-D2 (2 channels)
Order No.: EK-BF1-TP-D1 DALI2 1CH, EK-BF1-TP-D2 DALI2 2CH
Application: APEKBF1TPD1_V1.1.0, APEKBF1TPD2_V1.1.0

Coloured light control including device type 8 ECGs
Colour temperature (DT-8 Sub-Type Tc)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
DT-8 Sub-Type PrimaryN is not supported.

A plugin of configuration DALI bus deveice by KNX bus

DALI2 Gateway IC01D03DAL DCA

DCA for the DALI configuration of the KNX DALI2 Gateway secure TYFS671D and TYFS672D.

A plug-in of configuration DALI bus device by KNX bus

DALI Gateway GRDALI-TW02-KNX DCA

KNX Dali Gateway from Panasonic Life Solutions

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

A plugin of configuration DALI bus device by KNX bus

A plug in of configuration DALI bus device by KNX bus

Theben DALI-Gateway P64 V2 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX V2

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

Device Configuration App (DCA) for DALI KNX Gateway 64/128 (1 or 2 Channel)
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the DALI Gateway Color. This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software outside the ETS.

https://www.Feller.ch

A plugin of configuration Dali bus device by knx bus

DALI-2 System Config Tool(Hereinafter referred to as DCA) is a plugin of the ETS software for configuring DALI gateway, embedded in the application of DALI gateway, to conveniently debug and configure function of DALI gateway, and address DALI device.

KNX interface for DALI lighting control (KNX DALI gateway) with individual, group and broadcast control. Tunable white, light colour control, light scenes and human centric lighting. KNX Data Secure

The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. Compared to the standard NETx BMS App, the NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.

This application allows the download of custom images to be used as screensaver in Zennio Z28, Z35, Z35 H, Z35 v2 and Z40 touch panels.
The image dimensions must be 320x240 pixels. Supported formats: png, .jpg, .jpeg and .bmp.

DCA for commissioning the DALI devices and for setting their parameters for the DALI/KNX Gateway DA64-230/KNX REG, Part No. 93302

DLC-02-KN is a KNX to DALI gateway, used to connect DALI ECGs/ Driver via KNX installation.
This device Configuration App (DCA) is designed for the special surface for the DALI configurations.

Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control 64 Gateway with article number SCN-DA641.04 and SCN-DA642.04

For devices with firmware version V1.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S

Device Configuration App (DCA) for Wieland Electric KNX-DALI Gateway gesis KNX FLEX-DA64
Order number: 83.020.0643.0
Application: gesis KNX FLEX-DA64 V1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

For devices with firmware version V2.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S.