Simple, fast, faultless - this is how configuration and commissioning work with the STX Service-Tool. The SunControlObject replaces the complex linking of single group addresses and the STX Service-Tool supports the setting of the parameters. Once a channel is completed individual parameters or entire parameter sets can be copied to other channels just at the push of a button. For commissioning of SMI systems each drive can be controlled individually via ETS. The channel assignment can directly be changed and the adaptation of the group addresses and multiple programming of the application is not necessary anymore.
Contact: www.bms-solutions.de
Area of application:
Devices can be maintained comfortably using the Insta ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Area of application:
Devices can be maintained comfortably using the Jung ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Area of application:
Devices can be maintained comfortably using the Gira KNX Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Scope:
Feller's ETS service app provides users with a convenient way to maintain devices. New firmware can be installed onto existing devices. Furthermore, it is also possible to transfer older firmware versions to existing devices (for example, when replacing your device).
The ETS programming interface is used during the firmware programming process. The app supports all KNX media (TP, IP, RF).
https://www.feller.ch
The "WAREMA KNX Service App" ETS app can be used to manage the firmware of KNX devices from WAREMA Renkhoff SE.
When connected to the internet, the app attempts to download the latest data from the "WAREMA KNX Versions Server" each time the program starts. This downloaded data is locally saved as an offline copy, allowing the app to access it in the future if there is no internet connection.
Area of application:
Devices can be maintained comfortably using the Siegenia / KFV ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
The ise Service App makes it possible to update the firmware of ise KNX RF Multi products.
Furthermore, application program versions can be updated to the latest version if the ETS function "Update Application Program Version" is not available for compatibility reasons.
The app automatically adopts all previous parameter settings and group addresses.
Area of application:
With the ETS Service App, KNX Secure devices from Elsner Elektronik can be conveniently maintained. Use the programming interface of the ETS to:
- Import new firmware versions
- Transfer older firmware versions, e.g. when replacing a device.
The ETS Service App supports all KNX media (TP, IP, RF).
Area of application:
Devices can be maintained comfortably using the Steinel ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Developer website
http://www.steinel-professional.de
Version info
1.2.2.1418
Available for
ETS5
ETS6
Area of application:
Devices can be maintained comfortably using the Insta ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Area of application:
The Gira KNX Service App OTN enables convenient maintenance of selected Gira devices.
New firmware can be installed on existing devices.
Compatibility:
Product compatibility with this app can be found in the respective product documentation or by checking the ETS project via the app itself.
Compatible devices:
• 5146 00 Weather sensor with weather control unit for KNX
• 5147 00 Weather control unit for KNX
Area of application:
Devices can be maintained comfortably using the Casambi KNX Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Devices can be maintained comfortably using the Stiliger Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
More information can be found here.
Developer website
http://www.knx.org
This App will automatically create a snapshot of your ETS project (as knxproj) in a specified, project-specific location.
This is useful if you are working with several projects and want to
- include versions of the projects in a backup solution
- synchronize the versions with a cloud service (e.g. Dropbox®)
- deploy the project to a location accessible by other persons or tools
ETS5 has a similar facility named "recovery points". In contrast to the AutoBackup App, recovery points are not stored in project-specific folders and thus do not provide client isolation.
The current app version works only from ETS 5.7.2! The app is available for ETS6.
Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
DCA for xxter applications, to automatically synchronize with the xxter cloud service.
KNX2GO connects your ETS project with the KNX2GO smartphone app – locally, securely and without a laptop on the bus. The ETS add-in shares the lines you select from the open project over a token-protected network access; every result flows straight back into the project. ETS stays the leading data source – your phone becomes the tool in the field.
What KNX2GO does:
100 % local. No cloud service, no transmission to the provider or third parties – everything stays in your network, protected by a pairing token.
Requirements: ETS 6 · Windows · KNX2GO smartphone app on the same local network.
The AUTERAS® planning software generates cross-trade equipment concepts and uses AI to find suitable product combinations that can be automatically configured and integrated to a network. This saves the customer up to 90 % of the design and configuration effort, right down to the ETS!
AUTERAS® captures customer requirements in a natural form and uses them to generate standard-compliant room automation schemes in accordance with VDI 3813, EN 17609 and ISO 16484. The AI then derives implementation proposals using devices from the KNX catalog.
The ETS App from AUTERAS® represents the interface to the online service. For example, it can be used to load the automatically created device combinations from the KNX Online Catalog, configure them fully automatically and link them using group addresses.
KNX-MCP – ETS MCP Server with HTTPS for ETS5 and ETS6
Your AI assistant works directly inside the open ETS project.
KNX-MCP 1.2.0.4 (Release 2) is an ETS App with an integrated Model Context Protocol (MCP) server for ETS5 and ETS6. It connects compatible AI assistants to open KNX projects through the official ETS SDK – without exporting the project or creating a separate copy.
New in version 1.2.0.4: 97 MCP tools, optional HTTPS and improved direct AI connectivity.
KNX-MCP supports project analysis, editing, commissioning and troubleshooting of KNX installations. AI assistants work with current ETS project data and, subject to configured permissions, can access devices, group addresses, communication objects, parameters, building structures, topology and the KNX bus.
Direct AI integration and encrypted MCP communication
The redesigned MCP communication layer enables compatible AI assistants to connect directly using Streamable HTTP – often without an additional proxy or bridge.
• Optional HTTPS: The integrated MCP server can encrypt connections when HTTPS is enabled. Certificates can be created in the app or selected from the Windows certificate store.
• Authentication: The access key can be supplied using Authorization: Bearer. Existing X-KnxMcp-Key configurations remain compatible.
• Direct MCP clients: Claude Code, OpenAI Codex, Microsoft Scout, GitHub Copilot and other compatible MCP clients can connect directly.
• Claude App / Claude Desktop: Connection is available through the appropriate desktop integration or a compatible MCP bridge.
• Additional AI services: ChatGPT and Microsoft Copilot can connect to ETS through a suitable MCP gateway.
• Multiple AI agents: Several AI assistants can connect simultaneously. Client connections, tool requests and activity are visible in the ETS live monitor.
The MCP endpoint can be explicitly enabled for access from a trusted local network or intranet. By default, it is accessible only from the local computer. HTTPS, access-key protection and appropriate network restrictions are recommended for network access.
97 MCP tools for ETS projects and KNX automation
Release 2 provides 97 MCP tools, including 21 new tools. Available capabilities include:
• ETS project inspection, quality checks and documentation
• Reading and editing devices, communication objects and parameters
• Creating, linking, copying and renumbering KNX group addresses
• Managing rooms, floors, building structures and KNX topology
• Updating multiple devices or parameters in a single request
• Monitoring KNX telegrams, reading values and sending values with controlled permissions
• Working with KNX Secure certificates and tunnelling addresses of KNX IP interfaces
• Reading DALI gateway configuration from ETS project data
• Importing manufacturer product data into the ETS6 catalog
Many operations support batch processing with one approval and one ETS undo step, where supported by the corresponding ETS operation.
Typical questions and tasks for your AI assistant
• "Which projects are currently open in ETS? Please also list information about each of these projects."
• "Which presence detectors on the second floor are not linked to a lighting group yet?"
• "Which group addresses of the hall lighting have more than one sender?"
• "Create switching, dimming value and status addresses for meeting rooms 2.01 to 2.06."
• "Show me all devices, communication objects and parameters in the meeting room."
• "What is the current temperature in the server room?"
• "Which devices on line 1.1 are currently responding on the KNX bus?"
Full control over project changes and bus operations
You decide which functions your AI assistant may execute. Each tool has one of three permission levels: Allowed, Confirmation required or Blocked.
A project-wide read-only mode prevents project modifications and telegram transmission. Where supported by ETS, project changes are recorded as named undo steps. Sending telegram values requires individual confirmation by default. KNX device programming is blocked by default.
Multiple ETS projects, local operation and data privacy
KNX-MCP supports ETS5 version 5.7 or later and ETS6. Multiple open ETS projects can be accessed through a single MCP endpoint.
The application runs directly inside ETS on your computer. There is no central KNX-MCP cloud service through which your ETS project data is routed. You choose which MCP client and AI provider to use and what data that provider may process.
KNX-MCP includes structured tool descriptions and integrated help in six languages. Additional skills are not required for basic operation. Reusable workflows and further guidance are available through the KNX-MCP Community.
KNX-MCP 1.2.0.4 – Release 2 is currently available free of charge in the KNX Online Shop.
Product website – features, screenshots and setup:
KNX-MCP – Product Website
KNX-MCP – Setup and MCP Connection
Release notes – what's new in version 1.2.0.4:
KNX-MCP Release 2 – Release Notes EN/DE
Community – questions, bug reports, documentation and skills:
KNX-MCP Community on GitHub
Product support: support@knx-mcp.com