The ise RF Insight app can be used to analyse wireless installations featuring KNX RF Multi and RF Ready/RF+ devices. It provides troubleshooting guidance, and measurement results can be documented for system integrators or customers.
The app can be used from ETS 6.4 onwards, provided a KNX RF Multi/TP media coupler is installed in the RF line or segment.
The ise Service App makes it possible to update the firmware of ise KNX RF Multi products.
Furthermore, application program versions can be updated to the latest version if the ETS function "Update Application Program Version" is not available for compatibility reasons.
The app automatically adopts all previous parameter settings and group addresses.
The ise Remote Access app simplifies the remote maintenance and remote diagnosis of KNX systems with the ETS.
It establishes a connection with the remote access device in the system so that it can be used remotely as a KNX/IP interface.
Supported devices for this function:
- SMART CONNECT KNX Remote Access
- Gira S1
The app also enables the import of KNX data logger files from the device into the ETS bus monitor.
Supported devices for this function:
- SMART CONNECT KNX Remote Access
- Gira S1
- Gira KNX IP router
The KNX RF Field Strength Analyzer (KNX-RF-FSA) app is taking the innate uncertainty of KNX RF installations. By gathering the Received Signal Strength Indicators (RSSI) of all user-selected RF devices and displaying them in a colour-coded matrix, the KNX-RF-FSA makes testing and debugging of KNX RF device connections easier than ever before. Designed to be used for short and long-term observations of the device’s RSSIs, the KNX-RF-FSA is a high-quality tool that can highlight any weaknesses in a KNX RF installation. This tool also tests the functionality of activated repeater for increased area coverage to avoid future problems. The RF FSA is all you need for successfully commissioning your KNX RF installation. Available in MyKNX.
DCA for configuring ERA INN KNX interface DIN module.
The APP MDT RF + Range Check is a useful tool for the analysis and planning of KNX radio installations according to the new RF + standard.
The tool helps you to plan the installation location for new installations as well as to analyze and correct problems in existing radio installations. The MDT RF + Range Check shows you in a simple graphical matrix which connections are critical. Long-term analyzes are also possible to identify external interference sources.
The repeater functionality of the RF + devices can also be examined and evaluated with this tool.
This DCA is used to configure IR Interface IR100.
This app allows you to connect Hager KNX radio products to a KNX installation using the TR131N radio frequency-TP gateway.
The KNX Specifications cover all technical topics of the KNX Standard, from the first contact with the KNX technology, through the specification, certification rules and testing, and application descriptions. The different Volumes and Parts are clearly separated, and intended for the various responsibilities within a company.
Content of the KNX Handbook
PLEASE NOTE: this is the public version (3.0.0) of the KNX Specifications. KNX Members have access in their MyKNX account to the very latest version of the KNX Specifications, which is currently v3.0.3. This version is updated at regular intervals with the latest evolutions of the parts, volumes and application notes.
GPT available in ChatGPT store: GPT - KNX Specifications Navigator
Disclaimer
This GPT-based assistant is provided as an aid for individuals and companies interested in developing KNX solutions based on the KNX Specifications. It is currently in a testing phase and should not be considered a definitive or authoritative source of information.
While this assistant aims to provide guidance based on the KNX Specifications v3.0 and the KNX Development Guide, users are strongly advised to verify all technical details, processes, and compliance requirements against the official KNX documentation.
The KNX Standard and its specifications are complex, and incorrect interpretations may lead to development errors or non-compliance with KNX certification requirements. For the most accurate and up-to-date information, always refer to the original KNX Standard documents (available to KNX Members) and consult KNX Association resources when necessary.
By using this assistant, you acknowledge that it is provided "as is" without any warranties, and the responsibility for verifying the information remains with you.
Developer website
http://www.knx.org
Version info
3.0.0
The KNX Basic Course Documentation consists of the following chapters:
Version info
01.06
Related products
Basic course documentation eBook
/!\ Only works till ETS 6.3.0 /!\
Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.
KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.
The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.
KNX Space Commissioning also allows the export of the project into the ABB BuildingPro Edge, which is a solution hosting applications such as ABB BuildingPro Vision, used for monitoring and control of buildings.
The NETx BMS App is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. The NETx BMS App also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.
Use this app if you are using ETS5!
"Check and Improve" helps you ensure and improve the formal quality of your ETS projects. This includes the verification and semi-automatic correction of spelling, configurable naming conventions, and the assignment of Datapoint types.
Without much effort, the project gets more clearly arranged, better maintainable and will be the perfect base for further use, e.g. for a visualization.
Some details:
The Spell checker can make use of many freely available dictionaries in lots of languages e.g. from the OpenOffice and Mozilla projects, plus user dictionaries for additional words.
The naming conventions can be defined by combining building blocks like "alternative", "concatenation", "list of allowed names", "list of names from project", "pattern" etc. to a rule.
The Datapoint type assignment has access to an online database with information currently about approx. 1000 application programs (continuously growing).
The current app version works only from ETS 5.7.2! The app is available for ETS6.
Reactivates the protocol EIBlib/IP in ETS (not standardised and since KNXnet/IP redeemed). With this ETS App the establishment of an ETS connection using with this protocol is again possible.
Siemens offers the possibility to exchange data from SIMATIC S7 PLC to KNX systems via KNXnet/IP interfaces. This ETS App enables the user to export a Group Address data (Main addresses 0-15) from ETS in a CSV file which can be imported to Siemens KNX2S7 Editor. The additional available KNX2S7 Editor creates required data for SIMATIC S7.
With the “WAREMA KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects.
With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.
“KNXMCM BAline Studio Exchange” can in each case be run for only one device.
If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.
Easy2ETS tool can be used to read out an installation made of Easy Hager and Berker devices configured with TXA100 and to take over the configuration with ETS.
Note:
- RF Devices cannot be read out.
- Bus access and ETS products data are required (product database).
The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view.The NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.
Use this app if you are using ETS6!
TheKNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.
The KNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.
The KNX Basic Course Documentation consists of the following chapters:
Version info
01.06
Related products
Basic course documentation
This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.
KNX Virtual is a Windows application representing a KNX installation, i.e. it is not a physical installation but it behaves like one.
The advantage is that no investment in hardware (i.e. KNX power supply, KNX/USB interface or KNX/IP interface, KNX devices) needs to be made in order to test and play with KNX & ETS.
Developer website
http://www.knx.org
Version info
2.6.1
The KNX DALI-Gateway REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.
The KNX DALI-Gateway REG-K/IP1 is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.
With the WAREMA KNX SMI multiple actuators in surface-mounted or DIN rail-mounted housing, up to 16 SMI LoVo drives can be controlled independently of one another or in up to 16 groups. The manual override operation and status display of the binary inputs via the Bluetooth App and DCA App is unique and, additionally, operation is possible on the actuator itself. Commissioning and motor search/allocation is done via smartphone or the ETS DCA App. This app can also be used to read out and acknowledge the SMI Motor error list or to learn in tilt pulses.
https://youtu.be/EiAx1fra4ME
The Csv Importer (DCA) enables a simple and effective configuration of the KNX TP communication module CM8400 from Neuberger Gebäudeautomation GmbH.
The configuration can be exported or imported into a CSV file. Via the CSV file, the configuration can be synchronised with the AS project in PMC Studio or re-imported in another project. Thus a laborious configuration by hand is spared.
Area of application:
Devices can be maintained comfortably using the Insta ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
The ETS app JUNG IPS-Remote enables the remote maintenance of KNX installations via the Internet after local approval by the customer.
The connection is established by the JUNG KNX IP Secure interfaces. The remote maintenance works independent of the type of internet connection and doesn´t require any configuration of the local network environment.
After release via a communication object, the IP interface establishes a connection to the Remote Access Server (RAS). The ETS app JUNG IPS-Remote also connects to this server and sets up the corresponding connection.
To establish an encrypted connection between the ETS and the remote IP interface, the new IPS-Remote connection must be used.
Area of application:
Devices can be maintained comfortably using the Jung ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Area of application:
Devices can be maintained comfortably using the Gira KNX Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.
ETS APP: JUNG KNX Secure Key Loader
Note:
JUNG supports you in building up know-how about KNX Secure! We cover the hardware and software measures offered by KNX Secure in webinars. After successful completion you can receive a voucher that reduces the purchase price of this app. Further information is available at: www.jung.de/contact-knx-secure
Content:
In order to securely integrate the scanned device certificates into the ETS, the installer transfers the JSON files created with the JUNG KNX Secure Scanner to his computer. Several files can come together there, which he archives and imports into the ETS project using the ETS app JUNG KNX Secure Key Loader. This extension is available via the KNX Association App-Shop and is bound to the ETS dongle. The installation is performed via the App menu in the main menu of ETS 6 Professional.
This app is used to update firmware of HMS devices. The graphical user interface allows you to choose devices within a KNX line and update them with the newest firmware.
This application enables advanced configuration and commissioning of the DALI ballasts with the Zennio DALI-BOX Interface v2.
With the KNXtool-App you can import all KNXtool project information such as your devices, building structure, topology, group addresses and functions (complete with all relevant channel text, ID’s, Tags, etc.) directly into ETS.
The KNXtool is a comprehensive web based KNX design and planning tool which allows you to design, plan, manage, budget and document KNX system installations using one single software.
The KNXtool uses a drag-and-drop interface so you can graphically design and plan KNX projects with speed and accuracy.
ETS stands for Engineering Tool Software; a manufacturer-independent configuration software tool to design and configure intelligent home and building control installations with the KNX system. ETS is a software, which runs on Windows platform-based computers.
This version is intended for private usage for those wanting to design and program their own home with KNX using the classic ETS software user interface already known for many years. You may create one single project containing a maximum of 64 KNX products from any KNX manufacturer.
By ordering this product you implicitly confirm that you are aware that the ETS6 Home is a license type that only allows the creation of one single KNX project with maximum 64 devices. The license type is intended for technical savvy persons or home owners that collaborate together with a skilled KNX installer
Maximum of 64 KNX devices in one single project.
Intended for private usage only
Compatible with Windows 10/11
Only available as cloud license
No dongle provided for this product
The SpaceLogic KNX DALI-Gateway Basic Plus is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.
DLC-02-KN is a KNX to DALI gateway, used to connect DALI ECGs/ Driver via KNX installation.
This device Configuration App (DCA) is designed for the special surface for the DALI configurations.
Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Scope:
Feller's ETS service app provides users with a convenient way to maintain devices. New firmware can be installed onto existing devices. Furthermore, it is also possible to transfer older firmware versions to existing devices (for example, when replacing your device).
The ETS programming interface is used during the firmware programming process. The app supports all KNX media (TP, IP, RF).
https://www.feller.ch
The KNX IQ08 TPS device from DIVUS GmbH can be easily configured using the DIVUS KNX IQ DCA.
With the DIVUS VISION software, device parameterization is simple and intuitive. The configuration file exported from DIVUS VISION can be imported into ETS via the DIVUS KNX IQ DCA, where group addresses are assigned. Device download is performed through the known procedure in ETS.
Existing configurations can also be exported from the DIVUS KNX IQ DCA and so be modified in DIVUS VISION.
ETS5 and ETS6 DCA App to update user specific songs on Hugo Mueller AS36.03 knx audio interface.
This App allows the ETS user to perform firmware upgrades for Hager and Berker product.
The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.
Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.
KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.
The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.
KNX Space Commissioning also allows the export of the project into the ABB BuildingPro Edge, which is a solution hosting applications such as ABB BuildingPro Vision, used for monitoring and control of buildings.
Area of application:
Devices can be maintained comfortably using the Siegenia / KFV ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.
ESTADA is your planning software for easy, fast and intuitive planning of KNX projects. Plan your project with a graphical drag & drop interface in no time without tedious work in ETS.
With ESTADA, getting started with KNX is easier than ever as it takes care of all the parameterization and eliminates the need to work in ETS. Ideal for newcomers who do not want to complete an ETS course and highly appreciated by KNX professionals who want to rapidly plan complex KNX projects.
The plan-related user interface allows a clear planning of all consumers and their connection with actuators and scenes to complete functions. Not only a fast and clear planning is guaranteed, but also a reliable documentation. Function lists, component lists and room plans enable a seamless transfer of the planning phase to the execution. Of course, planning with several members is also possible.
Export the entire project as a project file directly to ETS or push your planning progress directly with our ETS app.
KNX has never been easier!
KNX interface for DALI lighting control (KNX DALI gateway) with individual, group and broadcast control. Tunable white, light colour control, light scenes and human centric lighting. KNX Data Secure
The BSS Firmware Update App enables the firmware of KNX devices to be updated easily and securely. With its intuitive user interface and automatic detection of the devices, it ensures a smooth update process.
Area of application:
With the ETS Service App, KNX Secure devices from Elsner Elektronik can be conveniently maintained. Use the programming interface of the ETS to:
- Import new firmware versions
- Transfer older firmware versions, e.g. when replacing a device.
The ETS Service App supports all KNX media (TP, IP, RF).
Area of application:
Devices can be maintained comfortably using the Steinel ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
Developer website
http://www.steinel-professional.de
Version info
1.2.2.1418
Available for
ETS5
ETS6
Bulk Linker App – Professional Mass Linking for Large-Scale Projects
The Bulk Linker App was developed specifically for experienced system integrators who regularly implement large and complex KNX installations. While the free Multi Linking feature in ETS 6.4.0 simplifies linking existing groups, Bulk Linker goes one step further.
Key Features:
- Automatic creation of new group addresses
- Customization of group addresses before creation
- Intelligent 1:1 linking with group objects
- Bulk import of serial numbers
Ideal for: High-rise buildings, campus installations, hotels, multi-dwelling units, and other large projects with hundreds or thousands of links.
Save time, increase efficiency, reduce errors.
Area of application:
Devices can be maintained comfortably using the Insta ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).
This subscription-based feature is tailored for System Integrators and Smart Electricians. It allows you to securely and remotely access and configure your customers' KNX Projects using ETS or eConfigure, as well as their Wiser for KNX or spaceLYnk controllers.
This subscription-based feature is tailored for System Integrators and Smart Electricians. It allows you to securely and remotely access and configure your customers' KNX Projects using ETS or eConfigure, as well as their Wiser for KNX or spaceLYnk controllers.
Configuration of DALI bus devices through the KNX bus interface.