Shop

The Intesis Modbus Device Manager allows you to:

• Upload templates of Modbus devices.
• Delete or replace existing devices.
• Upgrade the firmware of your device.

all for a quicker integration using the Intesis KNX-Modbus RTU gateway.

With ETS App Device Compare you can compare the an individual device from the installation with the available data in the corresponding ETS project. In this way the current state as in the installation can be compared with the expected state as in the ETS project. Dissimilarities in device configuration will be shown and the result can also serve as evidence in case a third party has tampered with the installation.

With the ETS App Replace Device, you can replace KNX devices while keeping their Group Addresses. This is possible for devices with similar functionality, regardless of the manufacturer.

The ETS App Device Reader can be used in order to read out the memory and the properties of devices, which will provide the user with crucial and possible clarifying information. This information can also be saved as a file.
Video presentation (EN)

DLC-02-KN is a KNX to DALI gateway, used to connect DALI ECGs/ Driver via KNX installation.
This device Configuration App (DCA) is designed for the special surface for the DALI configurations.

The Intesis DALI Device Manager allows you to:

· Commission and test the ECGS, groups, input devices, scenes, effects and time control.
· Add or replace devices.
· Synch the data with any possible change made via the Webserver.
· Create reports.

all for a smoth integration using the Intesis DALI-2 to KNX TP PRO Gateway.

For easy configuration of the Modbus KNX Gateway MG/S 11.100.1.1. With this DCA, the mapping of the Modbus KNX data points of a server can be exported as a reusable template. The DCA can also be used to import ready-made device templates from a database.

The KNX Specifications cover all technical topics of the KNX Standard, from the first contact with the KNX technology, through the specification, certification rules and testing, and application descriptions. The different Volumes and Parts are clearly separated, and intended for the various responsibilities within a company.

Content of the KNX Handbook

1. Primer
2. Guide for Development
3. System Specifications
4. Hardware Specifications and Tests
5. Certification
6. Profiles
7. Application Descriptions
8. System Conformance Tests
9. Standardised Components & Devices and Tests
10. Application Domain specific Standards

PLEASE NOTE: this is the public version (2.1) of the KNX Specification which already dates back a number of years. KNX Members have access in their MyKNX account to the very latest version of the KNX Specifications, which is currently v3.0.3. This version is updated at regular intervals with the latest evolutions of the parts, volumes and application notes.

The KNX Basic Course Documentation consists of the following chapters:

• KNX System Arguments
• KNX System Overview
• KNX TP1 Topology
• KNX Bus Devices
• KNX TP Installation
• KNX Powerline PL110
• KNX RF
• ETS Project Design: Basic
• ETS Project Design: Advanced
• ETS Commissioning
• ETS Diagnostics

With the ETS App Labels, device labels based on forms can be printed as stickers. The information (Individual Address, mounting, function, etc.) is taken directly from the ETS project. This not only facilitates the work of the installer or system integrator, but also provides consistent overview within distribution boards and cabinets. Please note that an installed version of Microsoft Word is needed for printing the labels.

All changes made in projects (except changes that have been made by device plug-ins) are registered in chronological order in the project history automatically. By licensing the Project Tracing app, you can see all the automatically created entries. This App can also serve to monitor the progress of projects under construction.
- You can find more information here

The ETS App Extended Copy is used to quickly create similar structures in a project. During the copy process, a dedicated dialog will allow devices, bus lines, even complete building parts together with their destination address assignments, configuration, Group Addresses, links, text descriptions and other information to be adjusted. Thereafter, the configuration is inserted seamlessly.

The Reconstruction tool can be used to read out devices in the installation and then create a new ETS project or update an existing project. You may also compare the data from the installation against an ETS project.
This allows to work on projects where the ETS database has been lost or is out of date. This will also work for installations which were created with a previous version of ETS.

These items can be reconstructed: topology, devices with individual address, application program, parameter settings and group object flags, priority and assigned group addresses. You need bus access and same product data which were used to program the devices.
Building or trade structure as well as name and description texts of areas, lines, devices and group addresses will not be reconstructed because they were not programmed into the device.

Note: Devices with plug-ins can only be read out / reconstructed, if supported by the manufacturer of the plug-ins. In case of doubt please contact the manufacturer or our support.
Devices whose product data cannot be used in the current ETS can not be reconstructed.

For more info see https://www.it-gmbh.de/en/ under Products - KNX - ETS Apps
The current app version works only from ETS 5.7.2! The app is available for ETS6.

For full system visualisation, telegrams shall be allowed to pass the line coupler. To this end, a dummy device is inserted in the ETS project. It contains all the Group Addresses required by the visualisation system. The ETS takes the Group Addresses from the dummy device into account when creating the filter tables.

Fill VisualizationDummy helps you to link a dummy device in the ETS with a list of Group Addresses for a visualization.
Product data for dummy devices can be obtained from several manufacturers.

The information about the group addresses can be read either from a file (different formats are supported), or the group addresses can be selected from the current ETS4 project by drag and drop.
The current app version works only from ETS 5.7.2! The app is available for ETS6.

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB Building Edge, which is a solution hosting applications such as ABB Ability Control Hub, used for monitoring and control of buildings.

To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC". This export functionality provides only basic information about the KNX installation. The NETx BMS App is a user-friendly way to import the whole KNX project and its meta-information into the NETx BMS Server or the NETx KNX OPC Server. The output of this ETS App is an enhanced export file that contains the used KNX Group Addresses, the deployed KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and Group Objects) as well as the building and trade view. In addition, the App detects the configured IP addresses of the KNXnet/IP routers and interfaces. Based on the topology of the KNX project, the App automatically assigns the KNX Group Addresses to the routers and interfaces that are later on used for accessing them. Thus, a manual, time-consuming and error-prone assignment of the KNX Group Addresses to the KNXnet/IP routers and interfaces is not necessary anymore. Using the NETx BMS App, the whole KNX project including the well-known ETS view can be imported into the NETx BMS Server or NETx KNX OPC Server in a fast and intuitive way.

Users can program the individual address of a KNX device by using the KNX serial number. Siemens offers selected products with removable labels printed with the unique KNX serial number on. In practical work the installer of a KNX device can fix the label to the device in the installation plan. So later on the ETS expert can program the KNX device without pressing the programming button. Therefore the KNX serial number is labeled as bar-code, it is possible to use a bar-code scanner.

The ETS App Function Test supports you in function test / acceptance of a finished KNX project:

• At any time, it is clearly visible which functions are tested and with which result.
• The results can be printed as report.
• For the function types Switching, Dimming, Sun protection and Heating, pre-defined "Mini-Visualizations" are available making it easy to view and modify the current states.
• It is possible to control the App from iOS or Android-based mobile devices with the help of the "Elvis Viewer" app.
  The current app version works only from ETS 5.7.2! The app is available for ETS6.

With the “KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects.

With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.

“KNXMCM BAline Studio Exchange” can in each case be run for only one device.

If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.

DCA to reload and change the symbols in the MDT Smart Button range.
Update function for the firmware of the MDT Smart buttons.
Supported devices:
BE-GT20W.01
BE-GT20S.01
BE-GT2TW.01
BE-GT2TS.01
BE-TAS86.01
BE-TAS86T.01
BE-TAS5504.01
BE-TAS55T4.01
BE-TAS6304.01
BE-TAS63T4.01

The KNX RF Field Strength Analyzer (KNX-RF-FSA) app is taking the innate uncertainty of KNX RF installations. By gathering the Received Signal Strength Indicators (RSSI) of all user-selected RF devices and displaying them in a colour-coded matrix, the KNX-RF-FSA makes testing and debugging of KNX RF device connections easier than ever before. Designed to be used for short and long-term observations of the device’s RSSIs, the KNX-RF-FSA is a high-quality tool that can highlight any weaknesses in a KNX RF installation. This tool also tests the functionality of activated repeater for increased area coverage to avoid future problems. The RF FSA is all you need for successfully commissioning your KNX RF installation. Available in MyKNX.

The APP MDT RF + Range Check is a useful tool for the analysis and planning of KNX radio installations according to the new RF + standard.
The tool helps you to plan the installation location for new installations as well as to analyze and correct problems in existing radio installations. The MDT RF + Range Check shows you in a simple graphical matrix which connections are critical. Long-term analyzes are also possible to identify external interference sources.
The repeater functionality of the RF + devices can also be examined and evaluated with this tool.

This App is needed for configuration of the ABB SUG/U 1.1 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.1 in the project can be processed at the same time. The download into the device is done by normal ETS download.

Easy2ETS tool can be used to read out an installation made of Easy Hager and Berker devices configured with TXA100 and to take over the configuration with ETS.
Note:
- RF Devices cannot be read out.
- Bus access and ETS products data are required (product database).

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS5 Professional is required.

This App is needed for configuration of the BJE 6186/40 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All 6186/40 in the project can be processed at the same time. The download into the device is done by normal ETS download.

Device Configuration App (DCA) for IPAS DALIControl gc16 (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-01-0110, DaliControl gc16-2-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. Compared to the standard NETx BMS App, the NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.

TheKNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

The KNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

The KNX Basic Course Documentation consists of the following chapters:

• ETS6 Professional
• System arguments
• System overview
• Topology
• Bus devices
• KNX RF
• TP Installation

DCA for commissioning the MDT DaliControl Gateway DALI16 or the MDT DaliControlGateway32.
This DCA can be used to commission and configure the DALI devices. The DALI subscribers can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

DCA App for Updating MDT devices.
The following devices are currently supported:
AKD-0201.02
AKD-0401.02

AKD-0424R.02
AKD-0424R2.02
AKD-0424V.02
AKD-0324V.02
AKD-0224V.02

AKI-0416.04
AKI-0816.04
AKI-1216.04

BE-GTL10x.x1
BE-GTL1Tx.x1
BE-GTL20x.x1
BE-GTL2Tx.x1
BE-GTL40x.x1
BE-GTL4Tx.x1

BE-TAL5501.x1
BE-TAL55T1.x1
BE-TAL5502.x1
BE-TAL55T2.x1
BE-TAL5504.x1
BE-TAL55T4.x1

BE-TAL6301.x1
BE-TAL63T1.x1
BE-TAL6302.x1
BE-TAL63T2.x1
BE-TAL6304.x1
BE-TAL63T4.x1

SCN-BWM55.x2
SCN-BWM55T.x2

SCN-LOG1.02
SCN-SAFE.01

SCN-RTN55S.01
SCN-RTR55S.01
SCN-RTR55O.01
SCN-TFS55S.01

SCN-G360D3.03
SCN-G360K3.03
SCN-P360D3.03
SCN-P360D4.03
SCN-P360K3.03
SCN-P360K4.03
SCN-P360E3.03

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

The Weinzierl BAOS CSV Importer is an easy way to export the existing configuration of a generic BAOS database to a CSV file and import it into another project. This eliminates the need for tedious manual configuration. The Weinzierl BAOS CSV Importer is available for all Weinzierl BAOS devices with a generic ETS product database.

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

This App is needed for configuration of the Control4 C4-KNX-SUAC Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.41 in the project can be processed at the same time. The download into the device is done by normal ETS download.

KNX Virtual is a Windows application representing a KNX installation, i.e. it is not a physical installation but it behaves like one.

The advantage is that no investment in hardware (i.e. KNX power supply, KNX/USB interface or KNX/IP interface, KNX devices) needs to be made in order to test and play with KNX & ETS.

The app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.

The functions are:
Update - Changes the application program to a later or earlier version while retaining current configurations.
Convert - Transfers / adopts a configuration from an identical or compatible source device.
Channel Copy - Copies a channel configuration to other channels on a multi-channel device.
Channel Exchange - Exchanges configurations between two channels on a multi-channel device.
Import / Export - Saves and reads device configurations as external files.

Device Configuration App (DCA) for IPAS DALIControl e64
Order No.: 4101-145-01
Application: DaliControl e64-01-0310

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

DCA for commissioning the MDT DaliControl Gateway SCN-DALI64.03.
This DCA can be used for commissioning and configuration of the DALI devices. The DALI devices can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The KNX DALI-Gateway REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

The KNX DALI-Gateway REG-K/IP1 is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

This ETS-APP is a tool that allows updating the operating system of some KNX Zennio devices through ETS without having to send them to the factory.

The OS update does not involve a change of functionality or version of the ETS application program, but updates a lower memory layer.
These updates are usually not necessary throughout the lifetime of the product unless there is a behaviour that cannot be changed with a new version of the application program via ETS.
In case you need to use this APP, our support team will have provided you with the necessary files (.bin).
Download the App manual: https://www.zennio.com/download/manual_fw_updater_en

If you want to update the ETS application program version, you can copy parameters and object links using the Zennio Parameter Copier application, also available in the KNX online shop.

The Weinzierl KNX Modbus Gateway ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl KNX Modbus RTU Gateway 886 database and import it into another gateway. This saves a tedious manual configuration.

Area of application:

Devices can be maintained comfortably using the Insta ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

DCA for commissioning the DALI devices and for setting their parameters for the DALI/KNX Gateway DA64-230/KNX REG, Part No. 93302

Area of application:

Devices can be maintained comfortably using the Jung ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Area of application:

Devices can be maintained comfortably using the Gira ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Device Configuration App (DCA) for IPAS DALIControl e64 Pro
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

This app is used to import the KNX configuration file for the GM/A 8.1 KNX Security Panel into ETS. Importing the KNX configuration file enables all relevant group objects of the KNX Security Panel in ETS. This app is not needed for general device settings or for device programming (download).

The ETS app "BJE Firmware Update 2.0" serves for updating the firmware of different Busch-Jaeger KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

The ETS app "ABB Firmware Update 2.0" serves for updating the firmware of different ABB KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

ETS APP: JUNG KNX Secure Key Loader

Note:
JUNG supports you in building up know-how about KNX Secure! We cover the hardware and software measures offered by KNX Secure in webinars. After successful completion you can receive a voucher that reduces the purchase price of this app. Further information is available at: www.jung.de/contact-knx-secure

Content:
In order to securely integrate the scanned device certificates into the ETS, the installer transfers the JSON files created with the JUNG KNX Secure Scanner to his computer. Several files can come together there, which he archives and imports into the ETS project using the ETS app JUNG KNX Secure Key Loader. This extension is available via the KNX Association App-Shop and is bound to the ETS dongle. The installation is performed via the App menu in the main menu of ETS 5 Professional.

This app is used to update firmware of HMS devices. The graphical user interface allows you to choose devices within a KNX line and update them with the newest firmware.

Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Theben Firmware Update App is a maintenance tool that allows you to update specific Theben KNX devices to a newer firmware version in case of bugfixes, new functionality and so on. Your application data and settings will not be removed.

With the KNXtool-App you can import all KNXtool project information such as your devices, building structure, topology, group addresses and functions (complete with all relevant channel text, ID’s, Tags, etc.) directly into ETS.

The KNXtool is a comprehensive web based KNX design and planning tool which allows you to design, plan, manage, budget and document KNX system installations using one single software.
The KNXtool uses a drag-and-drop interface so you can graphically design and plan KNX projects with speed and accuracy.

Device Configuration App (DCA) for IPAS DALIControl gc16plus (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-1 Plus_V1.1.0, DaliControl gc16-2 Plus_V1.1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

ETS stands for Engineering Tool Software; a manufacturer-independent configuration software tool to design and configure intelligent home and building control installations with the KNX system. ETS is a software, which runs on Windows platform-based computers.

This version is intended for private usage for those wanting to design and program their own home with KNX using the classic ETS software user interface already known for many years. You may create one single project containing a maximum of 64 KNX products from any KNX manufacturer.

By ordering this product you implicitly confirm that you are aware that the ETS6 Home is a license type that only allows the creation of one single KNX project with maximum 64 devices. The license type is intended for technical savvy persons or home owners that collaborate together with a skilled KNX installer

Maximum of 64 KNX devices in one single project.
Intended for private usage only
Compatible with Windows 10/11
Only available as cloud license
No dongle provided for this product

The SpaceLogic KNX DALI-Gateway Basic Plus is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control 64 Gateway with article number SCN-DA641.04 and SCN-DA642.04

For devices with firmware version V1.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Device Configuration App (DCA) for Wieland Electric KNX-DALI Gateway gesis KNX FLEX-DA64
Order number: 83.020.0643.0
Application: gesis KNX FLEX-DA64 V1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Scope:
Feller's ETS service app provides users with a convenient way to maintain devices. New firmware can be installed onto existing devices. Furthermore, it is also possible to transfer older firmware versions to existing devices (for example, when replacing your device).
The ETS programming interface is used during the firmware programming process. The app supports all KNX media (TP, IP, RF).

https://www.feller.ch

Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2

Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.

Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

A plugin of configuration DALI bus device by KNX bus

A plug-in of configuration DALI bus device of KNX

A plug-in of configuration IR bus device of KNX

The Weinzierl Modbus TCP Gateway 716 ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl Modbus TCP Gateway 716 database and import it into another gateway. This saves a tedious manual configuration.

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS6 Professional is required.

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

A plugin of configuration DALI bus device by KNX bus

Blumotix s.r.l.
Device Configuration App (dca) for BX-DALI-PLUS (AV06)
Order number: BX-DALI-PLUS
Application: BX-DALI-PLUS (AV06)
Device configuration DCA for the dali bus definition. The application is used to configure only DT6 dali devices, first enumeration, post-installation, groups and scenes.

Device Configuration App (DCA) for Gewiss GW90873 - Gateway KNX/DALI 64/16 advanced

Dali gateway is used to connect Dali devices via KNX ETS-APP.

Device Configuration App (DCA) for IPAS DALIControl e64 Pro V2
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro_V2.1.0

Support of Input Devices
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This Gira Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the Gira DALI Gateway Colour (order number 2111 00, 2112 00). This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software beyond the ETS.

To carry out the DALI commissioning and the DALI test to the DALI-2 Gateway Colour this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

This app is required to configure the Theben AC IR gateway. With the help of the app, the manufacturer of the split unit and the model of the remote control are loaded into the ETS application.
All Theben AC IR Gateways in the project can be edited simultaneously. The download into the device is then carried out via the normal ETS download.

A plugin of configuration for KNX IR device

The "WAREMA KNX Service App" ETS app can be used to manage the firmware of KNX devices from WAREMA Renkhoff SE.

When connected to the internet, the app attempts to download the latest data from the "WAREMA KNX Versions Server" each time the program starts. This downloaded data is locally saved as an offline copy, allowing the app to access it in the future if there is no internet connection.

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Device Configuration App (DCA) for Ekinex KNX/DALI gateway EK-BF1-TP-D1 (1 channel) or EK-BF1-TP-D2 (2 channels)
Order No.: EK-BF1-TP-D1 DALI2 1CH, EK-BF1-TP-D2 DALI2 2CH
Application: APEKBF1TPD1_V1.1.0, APEKBF1TPD2_V1.1.0

Coloured light control including device type 8 ECGs
Colour temperature (DT-8 Sub-Type Tc)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
DT-8 Sub-Type PrimaryN is not supported.

Device configuration application for PLC-based WAGO devices.

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB Building Edge, which is a solution hosting applications such as ABB Ability Control Hub, used for monitoring and control of buildings.

Area of application:

Devices can be maintained comfortably using the Siegenia / KFV ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

A plug-in of configuration DALI bus device by KNX bus

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

A plugin of configuration DALI bus device by KNX bus

This application enables advanced configuration and commissioning of DALI ECGs through Zennio DALI devices.

A ir module of configuration device by knx bus

A plug in of configuration DALI bus device by KNX bus

Theben DALI-Gateway P64 V2 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX V2

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

For devices with firmware version V2.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S.

Device Configuration App (DCA) for DALI KNX Gateway 64/128 (1 or 2 Channel)
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the DALI Gateway Color. This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software outside the ETS.

https://www.Feller.ch

A plugin of configuration Dali bus device by knx bus

DALI-2 System Config Tool(Hereinafter referred to as DCA) is a plugin of the ETS software for configuring DALI gateway, embedded in the application of DALI gateway, to conveniently debug and configure function of DALI gateway, and address DALI device.

The BSS Firmware Update App enables the firmware of KNX devices to be updated easily and securely. With its intuitive user interface and automatic detection of the devices, it ensures a smooth update process.

With the Weinzierl KNX Modbus RTU Gateway 886.1 ConfigTool a so-called DCA (Device Configuration AddIn) is available for the ETS. With this it is possible to export the configuration of a Weinzierl KNX Modbus RTU Gateway 886.1 database and to import it into another gateway, thus saving a tedious configuration by hand.

Area of application:
With the ETS Service App, KNX Secure devices from Elsner Elektronik can be conveniently maintained. Use the programming interface of the ETS to:
- Import new firmware versions
- Transfer older firmware versions, e.g. when replacing a device.
The ETS Service App supports all KNX media (TP, IP, RF).

Area of application:

Devices can be maintained comfortably using the Steinel ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).