Shop

This ETS-APP is a tool that allows updating the operating system of some KNX Zennio devices through ETS without having to send them to the factory.

The OS update does not involve a change of functionality or version of the ETS application program, but updates a lower memory layer.
These updates are usually not necessary throughout the lifetime of the product unless there is a behaviour that cannot be changed with a new version of the application program via ETS.
In case you need to use this APP, our support team will have provided you with the necessary files (.bin).
Download the App manual: https://www.zennio.com/download/manual_fw_updater_en

If you want to update the ETS application program version, you can copy parameters and object links using the Zennio Parameter Copier application, also available in the KNX online shop.

This application enables advanced configuration and commissioning of DALI ECGs through Zennio DALI devices.

The Reconstruction tool can be used to read out devices in the installation and then create a new ETS project or update an existing project. You may also compare the data from the installation against an ETS project.
This allows to work on projects where the ETS database has been lost or is out of date. This will also work for installations which were created with a previous version of ETS.

These items can be reconstructed: topology, devices with individual address, application program, parameter settings and group object flags, priority and assigned group addresses. You need bus access and same product data which were used to program the devices.
Building or trade structure as well as name and description texts of areas, lines, devices and group addresses will not be reconstructed because they were not programmed into the device.

Note: Devices with plug-ins can only be read out / reconstructed, if supported by the manufacturer of the plug-ins. In case of doubt please contact the manufacturer or our support.
Devices whose product data cannot be used in the current ETS can not be reconstructed.

For more info see https://www.it-gmbh.de/en/ under Products - KNX - ETS Apps
The current app version works only from ETS 5.7.2! The app is available for ETS6.

/!\ Only works till ETS 6.3.0 /!\

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB BuildingPro Edge, which is a solution hosting applications such as ABB BuildingPro Vision, used for monitoring and control of buildings.

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

The app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.

The functions are:
Update - Changes the application program to a later or earlier version while retaining current configurations.
Convert - Transfers / adopts a configuration from an identical or compatible source device.
Channel Copy - Copies a channel configuration to other channels on a multi-channel device.
Channel Exchange - Exchanges configurations between two channels on a multi-channel device.
Import / Export - Saves and reads device configurations as external files.

Simple, fast, faultless - this is how configuration and commissioning work with the STX Service-Tool. The SunControlObject replaces the complex linking of single group addresses and the STX Service-Tool supports the setting of the parameters. Once a channel is completed individual parameters or entire parameter sets can be copied to other channels just at the push of a button. For commissioning of SMI systems each drive can be controlled individually via ETS. The channel assignment can directly be changed and the adaptation of the group addresses and multiple programming of the application is not necessary anymore.

Contact: www.bms-solutions.de

This application allows the download of custom images to be used as screensaver in Zennio Z28, Z35, Z35 H, Z35 v2, Z35 v3 and Z40 touch panels.
The image dimensions must be 320x240 pixels. Supported formats: png, .jpg, .jpeg and .bmp.

This DCA is used to configure weekly program parameters for Multi Functional Switch MS104 and MS104-D

This application enables advanced configuration and commissioning of the DALI ballasts with the Zennio DALI-BOX Interface v2.

The Siemens Channel Multiplier App allows the transfer of parameters from one channel to one or more other channels between products included in an ETS project. The user defines one channel of a product as the reference channel and determines all identical channels to be parameterized identically. Changes in the reference channel will automatically be copied to the selected identical channels.

This DCA enables the KNX panel 8" from JUNG to be commissioned. With the seperate software JUNG KNX SMART PANEL DESIGNER the KNX-Panel 8" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the JUNG KNX SMART PANEL DESIGNER.

The Griesser MACH App revolutionizes the configuration of medium and large installations with JAX sun protection actuators. Seamlessly integrated into ETS, the MACH App enables up to ten times faster and highly flexible parameterization – efficiently across multiple channels, devices, or even the entire project.
Its structured layout across three areas—facade products, functions, and sectors—makes handling remarkably intuitive.
Experience the impressive MACH configuration speed in the short trailer!

https://www.youtube.com/watch?v=ghYbUELn2m4

The KNX IQ08 TPS device from DIVUS GmbH can be easily configured using the DIVUS KNX IQ DCA.
With the DIVUS VISION software, device parameterization is simple and intuitive. The configuration file exported from DIVUS VISION can be imported into ETS via the DIVUS KNX IQ DCA, where group addresses are assigned. Device download is performed through the known procedure in ETS.
Existing configurations can also be exported from the DIVUS KNX IQ DCA and so be modified in DIVUS VISION.

This DCA Version A enables the KNX panel 7" Version A from Feller to be commissioned. Via the ConfigTool Version A the KNX-Panel 7" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

This DCA enables the KNX-Panel 7" Version B from Feller to be commissioned. Via the ConfigTool Version B the KNX-Panel 7" version B can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

This Gira Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the Gira DALI Gateway Colour (order number 2111 00, 2112 00). This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software beyond the ETS.

To carry out the DALI commissioning and the DALI test to the DALI-2 Gateway Colour this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI sensors by using the familiar ETS environment without having to use additional software beyond the ETS.

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB BuildingPro Edge, which is a solution hosting applications such as ABB BuildingPro Vision, used for monitoring and control of buildings.

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

ESTADA is your planning software for easy, fast and intuitive planning of KNX projects. Plan your project with a graphical drag & drop interface in no time without tedious work in ETS.
With ESTADA, getting started with KNX is easier than ever as it takes care of all the parameterization and eliminates the need to work in ETS. Ideal for newcomers who do not want to complete an ETS course and highly appreciated by KNX professionals who want to rapidly plan complex KNX projects.

The plan-related user interface allows a clear planning of all consumers and their connection with actuators and scenes to complete functions. Not only a fast and clear planning is guaranteed, but also a reliable documentation. Function lists, component lists and room plans enable a seamless transfer of the planning phase to the execution. Of course, planning with several members is also possible.

Export the entire project as a project file directly to ETS or push your planning progress directly with our ETS app.

KNX has never been easier!

The ise Service App makes it possible to update the firmware of ise KNX RF Multi products.

Furthermore, application program versions can be updated to the latest version if the ETS function "Update Application Program Version" is not available for compatibility reasons.

The app automatically adopts all previous parameter settings and group addresses.

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

This Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the DALI Gateway Color. This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software outside the ETS.

https://www.Feller.ch

The INTESIS KNX/UNIVERSAL Configuration Tool is a DCA which allows to:

· Update the RCF database.
· Autolearn the RCF of an IR Remote Controller.
· Autoconfigure AC unit features parameters according to the selected RCF.
· Download the IR configuration.
· Update the firmware.

o Device Configuration App (DCA) for SIEMENS KNX/DALI Gateways N 141/14 & N 141/32 V.01
o Order nr.: 5WG1141-1AB14, 5WG1141-1AB32
o The fully ETS-integrated Device Configuration App (DCA), which complements the standard parameter dialog, is used for DALI commissioning and DALI testing with the KNX/DALI Gateways N 141/14 and N 141/32. This allows for the identification, addressing, and assignment of DALI operating devices and DALI-2 sensors using the familiar ETS environment, without needing additional software besides ETS.
o For more information about DCA installation, please refer to the application program description on https://www.siemens.com/knx-td

This Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialogue, is used for internal device linking.
For use with the following JUNG products: 2590M1SR / 2570M1SR

This DCA is used for commissioning and testing the DALI system via the Blumotix BX-DALIPRO2 Gateway.
It is a Device Configuration App fully integrated into the ETS (DCA), which also includes the standard parameter dialog
Thanks to this integration, it is possible to identify, address and assign DALI control devices and sensors directly within the ETS environment, without the need for external software to the ETS system.

To carry out the DALI commissioning and the DALI test to the Casambi KNX DALI Hybrid Gateways this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI control devices (sensors) by using the familiar ETS environment without having to use additional software beyond the ETS.

To carry out the DALI commissioning and the DALI test to the Stiliger DALI Gateways this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI control devices (sensors) by using the familiar ETS environment without having to use additional software beyond the ETS.

The Gira HLK/HVAC IR Gateway DCA allows to:

· Update the RCF database.
· Autolearn the RCF of an IR Remote Controller.
· Autoconfigure AC unit features parameters according to the selected RCF.
· Download the IR configuration.
· Update the firmware.

OWL ProBuilder is an ETS6 app by OWL Automata P.C. that runs inside ETS and enables projects generated by external OWL Automata tools to be imported directly into the currently open ETS project.
The user imports a .knxproj file, reviews any detected conflicts, and confirms the import. ProBuilder then applies the configuration through ETS, including topology, areas, lines, devices, group addresses, trades, building structure, device parameters, and related settings.
ProBuilder works with OWL Automata tools such as:
Chameleon+
A low-code, text-based design and engineering platform for hotel room automation that enables Siemens LOGO! to be used as a powerful and versatile KNX GRMS controller. Users design typical rooms, and Chameleon+ generates the complete hotel ETS project from them.
Application Template
A ProBuilder microapp that allows selected devices and their linked Group Addresses to be extracted from any KNX project as a reusable application template. Templates can be adapted for a target project and imported back into ETS as complete applications, allowing users to build their own template library and exchange templates with others.

o Device Configuration App (DCA) for SIEMENS KNX/DALI Gateways N 141/14 & N 141/32 V3.0
o Order nr.: 5WG1141-1AB14, 5WG1141-1AB32
o The fully ETS-integrated Device Configuration App (DCA), which complements the standard parameter dialog, is used for DALI commissioning and DALI testing with the KNX/DALI Gateways N 141/14 and N 141/32. This allows for the identification, addressing, and assignment of DALI operating devices and DALI-2 sensors using the familiar ETS environment, without needing additional software besides ETS.
o For more information about DCA installation, please refer to the application program description on https://www.siemens.com/knx-td

ETSpilot – AI Assistant for the ETS

ETSpilot is an AI-powered assistant for the ETS, consisting of an ETS AddIn and an associated web portal.

The AddIn integrates directly into the ETS and provides an intelligent assistant that supports the planner in designing KNX installations. It analyzes the open project, answers questions in chat and agent mode, and can automate recurring work steps – such as creating and parameterizing devices, structuring projects, and generating group addresses.

The Portal (account.etspilot.de) is used for account and subscription management, for storing your own AI provider and API key, for maintaining prompt templates, and for accessing multilingual help articles. Users retain full control over the AI services they use and their data.

ETSpilot speeds up commissioning, reduces routine effort, and lowers the barrier to entry for working with the ETS – with full transparency over all AI interactions.

Note: This version is currently a public beta. Features may still change and occasional issues may occur. We welcome your feedback.

Kiloelec KN/GWDL02 DCA is an ETS Device Configuration App for the KN/GWDL02 KNX/DALI Gateway. It provides a device-specific configuration interface in ETS for DALI ECG addressing, group assignment, scene
configuration, dimming parameters, color temperature and RGBW settings. The app is linked to the corresponding KNX product database and is used only inside the ETS device configuration context.

To carry out the DALI commissioning and the DALI test to the KNX SECURE DALI GATEWAY INS this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI control devices (sensors) by using the familiar ETS environment without having to use additional software beyond the ETS.

Your documents become the KNX project — for ETS 5 and ETS 6.

Building the project

The bill of quantities, room and device lists, distribution board plans, floor plans, the customer's email: hand your AI assistant what you already have. ETS Power Editor gives it hands — and the expertise that goes with them. It works directly in the project you have open:

• the AI takes devices from the catalogue,
• creates group addresses and links the objects,
• assigns rooms and trades
• and commissions on the bus.

Whatever is not in your documents, it asks about. You keep working in the ETS alongside it.

Parametrising

The app supports your AI just as reliably when parametrising your devices. It is your AI assistant that names the goal, not the route — the app finds that itself. Where the instruction is ambiguous, it presents the options instead of guessing.

For this the app turns the huge product databases of the devices in your ETS into structured information for your AI. You do not have to supply anything else — which also leaves you entirely free in your choice of manufacturer.

The same goes for more complex devices: a smart touch push-button with its pages, tiles and functions just as much as a switch actuator channel. On top of that it comes with general KNX knowledge — for example trades, topology and the way an ETS project is put together.

Device configuration apps (DCAs) that some manufacturers supply for setting up their devices in the ETS are not necessarily supported — their structures are not readily accessible.

Where does my project data end up?

Anyone working with AI today is right to ask. So here is the answer, before you have to go looking for it. Here, DATA PROTECTION is top priority! In IT, collecting no data and keeping the rest to a minimum is the simplest protection against data breaches — what is not there cannot be lost either. Anything else makes no sense to us.

• There is no third party between you and the AI application of your choice - you talk directly to the ETS app in your project
• You can therefore also use the app with a locally hosted language model — in which case nobody outside gets access to your sensitive data.
• Your project data is not stored on our servers - because it is never transferred there.
• Nothing of your work in your project is stored or analysed by us — the app's log stays on your own computer.

What does my AI see?

Of course your AI has to be given the data it is meant to work with.
You can, however, make some of the contents of the ETS project inaccessible to the AI: in the Privacy section you block the entries from the project header — the project name is often your customer's address — and individual device parameters such as stored credentials.
Blocked values never reach the AI at all; all it sees there is "hidden".

Local access only

The connector runs exclusively on your own computer and cannot be reached over the network. It starts in read-only mode, you grant write access in the ETS, and every action is written to the log. You open ETS Power Editor inside a project — before that the ETS does not run it at all, and afterwards it has access to nothing but the project it is running in.

Your AI

Through the open MCP standard (Model Context Protocol) you work with the AI application of your choice: Claude Desktop, Cursor, Antigravity, ChatGPT (Codex) or any other that speaks MCP. You choose and pay for the artificial intelligence yourself.

It also works without an AI application: a script engine for batch commands from Excel.

Reading included

Reading and searching your project is always included. Everything else — above all, anything that changes your project or your installation — can be added monthly through Haar-Informatik and ended any month; prices on our website.

Guide, examples and full details: https://haar-informatik.de/ets-power-editor/

User interface in German, English, French and Spanish. Haar-Informatik, Zirndorf (Germany).

This tool is designed for DALI ballast management, covering essential functions such as basic parameter configuration, read/write operations, and scene setup. All features are integrated into a plugin-based configuration interface to streamline and enhance debugging efficiency.

Your ETS project now answers questions.

Ask your AI assistant what is in your open ETS project – MCP-Connector Lite gets the
answer from ETS. It links ETS to AI assistants such as Claude through the open Model
Context Protocol (MCP). Instead of searching lists and opening dialogs, you ask in your
own words:

• "Which communication objects are not linked to any group address yet?"
• "Show every device on line 1.1 with its room."
• "What is the behaviour after bus voltage recovery on the switch actuators upstairs?"
• "Which values does this parameter accept at all?"
• "Export the group addresses as CSV."

The AI reads topology, buildings, trades, functions, group addresses, devices,
parameters, communication objects and the product data in the project.

This edition reads, and nothing else:
• Lite offers the reading tools only. Nothing in the project changes – no entry in the
undo history, no confirmation prompt, no interference with work in progress.
• The answers come from ETS itself, not from a copy kept beside it.
• The AI learns at the parameter itself which values it accepts – instead of guessing.
• When ETS refuses a query, you learn why – and what to do next.
• This is how you survey a project, check it before handover, document it and track
down faults.

Your project stays with you: the connector runs inside ETS and opens no network
connection of its own. You decide which AI sees your project data by choosing your
assistant.

Creating, changing and deleting inside the project – with preview, a named entry in the
ETS undo history and a read-back of every change – is offered by MCP-Connector
Professional.