Shop

Sort By

With the MDT Media App, custom images and icons can be uploaded to compatible MDT KNX products with a display.

Developer website
http://www.mdt-group.com

Version info
1.1.0.6

Available for
ETS5
ETS6

DCA for creating the dynamic templates for the pages and selecting the functions and background colours of the tile.

Developer website
http://www.mdt-group.com

Version info
1.1.0.3

Available for
ETS5
ETS6

The APP MDT RF + Range Check is a useful tool for the analysis and planning of KNX radio installations according to the new RF + standard.
The tool helps you to plan the installation location for new installations as well as to analyze and correct problems in existing radio installations. The MDT RF + Range Check shows you in a simple graphical matrix which connections are critical. Long-term analyzes are also possible to identify external interference sources.
The repeater functionality of the RF + devices can also be examined and evaluated with this tool.

Developer website
http://www.mdt-group.com

Version info
1.4.0.1

Available for
ETS6

Area of application:

Devices can be maintained comfortably using the Insta ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Developer website
http://www.insta.de

Version info
1.2.3.1469

Available for
ETS5
ETS6

Area of application:

Devices can be maintained comfortably using the Jung ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Developer website
http://www.jung.de

Version info
1.2.3.1469

Available for
ETS5
ETS6

Area of application:

Devices can be maintained comfortably using the Gira KNX Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Developer website
http://www.gira.de

Version info
1.2.3.1469

Available for
ETS5
ETS6

Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control 64 Gateway with article number SCN-DA641.04 and SCN-DA642.04

Developer website
http://www.mdt-group.com

Version info
4.0.1.0

Available for
ETS5
ETS6

For devices with firmware version V1.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S

Developer website
http://www.mdt-group.com

Version info
1.1.0.0

Available for
ETS5

Scope:
Feller's ETS service app provides users with a convenient way to maintain devices. New firmware can be installed onto existing devices. Furthermore, it is also possible to transfer older firmware versions to existing devices (for example, when replacing your device).
The ETS programming interface is used during the firmware programming process. The app supports all KNX media (TP, IP, RF).

https://www.feller.ch

Developer website
http://www.feller.ch

Version info
1.1.2.1270

Available for
ETS5
ETS6

Area of application:

Devices can be maintained comfortably using the Siegenia / KFV ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Developer website
https://www.siegenia.com/de

Version info
1.1.2.1290

Available for
ETS5
ETS6

For devices with firmware version V2.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S.

Developer website
http://www.mdt-group.com

Version info
2.1.2.0

Available for
ETS5
ETS6

Area of application:
With the ETS Service App, KNX Secure devices from Elsner Elektronik can be conveniently maintained. Use the programming interface of the ETS to:
- Import new firmware versions
- Transfer older firmware versions, e.g. when replacing a device.
The ETS Service App supports all KNX media (TP, IP, RF).

Developer website
http://www.elsner-elektronik.de

Version info
1.2.3.1486

Available for
ETS5
ETS6

The MDT firmware update app can be used to update individual or multiple MDT devices.

Developer website
http://www.mdt-group.com

Version info
1.3.0.5

Available for
ETS5
ETS6

The configuration of the MDT KNX Touch Panel VisuControl Plus is carried out entirely within the Windows application (www.mdt-group.com). Once the configuration has been completed, the project generated there is exported and then imported into this DCA.
By importing, the user automatically receives all relevant KNX objects required for further integration into the ETS.
In addition to the DCA, the KNX application of the touch panel is also required.
The DCA also enables the export of an existing configuration.

Developer website
http://www.mdt-group.com

Version info
1.0.0.0

Available for
ETS5
ETS6

GAMMA Converter App is used to exchange applications of Siemens products automatically.
It expands the basic functionality of the GAMMA Converter Tools with the feature, to exchange the application within the ETS automatically.

Therefore the App uses for converting the data the KNX Converter Libary of Siemens, which can be downloaded for free.

The exchange of applications is possible in case of a single product or from more products to one product.

More information about supported applications and products: http://www.siemens.com/gamma-converter

Developer website
http://www.siemens.com/knx

Version info
2.3.5390.0

Available for
ETS5
ETS6

The NETx BMS App is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. The NETx BMS App also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.
Use this app if you are using ETS5!

Developer website
http://www.netxautomation.com

Version info
1.0.0.13

Available for
ETS5
ETS6

The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view.The NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.
Use this app if you are using ETS6!

Developer website
http://www.netxautomation.com

Version info
1.0.0.13

Available for
ETS6

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

Developer website
http://www.abb.com/knx

Version info
1.0.17

Available for
ETS5

DCA for loading and changing the symbols in the MDT Operation Unit Smart.

Developer website
http://www.mdt-group.com

Version info
1.3.0.0

Available for
ETS5

DCA for commissioning the MDT DaliControl Gateway SCN-DALI64.03.
This DCA can be used for commissioning and configuration of the DALI devices. The DALI devices can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Developer website
http://www.mdt-group.com

Version info
1.1.3.0

Available for
ETS5
ETS6

The IoT Dashboard ETS App enables you to export the complete building structure and all group addresses from the ETS into the IoT Dashboard Tool. This dashboard provides you with pre-programmed frames to get fast and high quality results. It makes it possible to do changes very quick and easy and thanks to this ETS App you can load all data back into ETS very quickly.

Developer website
http://www.busch-jaeger.de

Version info
1.0.2.0

Available for
ETS5
ETS6

This application describes the supervision of a KNX installation for the "Energeasy connect by Rexel" home automation box. Ideal for housing and small tertiary.

The principle is simple:
1 / Set up your KNX installation with ETS5 (topology, addition of participants, settings, assignment of individual addresses and groups ...).

2 / The App then allows you to:
Describe the parts and equipment of your project (eg living room lamp, kitchen shutter, etc.).
KNX / IP gateway scanner.
Generate a .XML file describing the project configuration.

3 / Import the .XML into energeasy connect, allowing control via the E.Connect 2 application.

www.energeasyconnect.com/support/nous-contacter

Developer website
http://www.rexel.fr

Version info
1.0.10

Available for
ETS5
ETS6

The IoT Dashboard ETS App enables you to export the complete building structure and all group addresses from the ETS into the IoT Dashboard. This dashboard provides you with preprogrammed frames to get fast and high quality results. It makes it possible to do changes very quick and easy and thanks to this app you can load all data back into ETS very quickly.

Developer website
http://www.abb.com/knx

Version info
1.0.2.0

Available for
ETS5
ETS6

domovea secured proxy app helps you to establish a secured proxy KNX/IP tunnelling in order to connect safely to a remote KNX installation in ETS.

Developer website
http://www.hager.com

Version info
1.3.0.1

Available for
ETS5
ETS6

This app is used to import the KNX configuration file for the GM/A 8.1 KNX Security Panel into ETS. Importing the KNX configuration file enables all relevant group objects of the KNX Security Panel in ETS. This app is not needed for general device settings or for device programming (download).

Developer website
http://www.abb.com/knx

Version info
1.0.50

Available for
ETS5

DLC-02-KN is a KNX to DALI gateway, used to connect DALI ECGs/ Driver via KNX installation.
This device Configuration App (DCA) is designed for the special surface for the DALI configurations.

Developer website
http://building.meanwell.com

Version info
3.0.0.1

Available for
ETS5
ETS6

The Griesser MACH App revolutionizes the configuration of medium and large installations with JAX sun protection actuators. Seamlessly integrated into ETS, the MACH App enables up to ten times faster and highly flexible parameterization – efficiently across multiple channels, devices, or even the entire project.
Its structured layout across three areas—facade products, functions, and sectors—makes handling remarkably intuitive.
Experience the impressive MACH configuration speed in the short trailer!

https://www.youtube.com/watch?v=ghYbUELn2m4

Developer website
http://www.griesser.ch

Version info
1.0.2.0

Available for
ETS5
ETS6

KNX Gateway for IR Configuration App is a plugin of configuration the KNX Gateway for IR,Flush mounted/Ceiling by KNX bus

Developer website
http://www.gvssmart.com

Version info
2.1.2.8

Available for
ETS5
ETS6

To carry out the DALI commissioning and the DALI test to the DALI-2 Gateway Colour this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI sensors by using the familiar ETS environment without having to use additional software beyond the ETS.

Developer website
http://www.jung.de

Version info
2.0.0.1471

Available for
ETS5
ETS6

This app is required to configure the Theben AC IR gateway. With the help of the app, the manufacturer of the split unit and the model of the remote control are loaded into the ETS application.
All Theben AC IR Gateways in the project can be edited simultaneously. The download into the device is then carried out via the normal ETS download.

Developer website
http://www.theben.de

Version info
1.0.36.0

Available for
ETS5
ETS6

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

Developer website
http://www.abb.com/knx

Version info
2.0.24

Available for
ETS6

The ise Service App makes it possible to update the firmware of ise KNX RF Multi products.

Furthermore, application program versions can be updated to the latest version if the ETS function "Update Application Program Version" is not available for compatibility reasons.

The app automatically adopts all previous parameter settings and group addresses.

Developer website
http://www.ise.de

Version info
2.2.0.523

Available for
ETS5
ETS6

The ABB KNX/MP-Bus Controller Configuration App is used for the configuration of the MP-Bus devices connected to the ABB MPG/S 8.1.1 KNX/MP-Bus Controller. It can be used for the addressing of the MP-Bus devices as well as for the verification of the installation or to scan for already installed MP-Bus devices and to fix errors in the address and profile configuration.

Developer website
http://www.abb.com/knx

Version info
1.0.34.0a

Available for
ETS5
ETS6

Area of application:
The Gira KNX Service App OTN enables convenient maintenance of selected Gira devices.
New firmware can be installed on existing devices.

Compatibility:
Product compatibility with this app can be found in the respective product documentation or by checking the ETS project via the app itself.

Compatible devices:
• 5146 00 Weather sensor with weather control unit for KNX
• 5147 00 Weather control unit for KNX

Developer website
http://www.gira.de

Version info
2.1.0.1

Available for
ETS5
ETS6

DCA App to configure the Ekinex KNX/DALI-2 Smart Gateway EK-BI1-TP-D1 device.

Developer website
http://www.ekinex.com

Version info
2.1.3.5

Available for
ETS5
ETS6

The KNX Converter App enables the automatic conversion and migration of Siemens device applications within ETS projects.
Existing project data can be transferred between supported source and target applications, significantly reducing engineering effort during application updates, device replacements, and product migrations.
The available conversion options depend on the supported converter definitions.

For more information on supported devices and applications, please visit: http://www.siemens.com/knx-converter

Developer website
http://www.siemens.com/knx

Version info
2.1.31.188

Available for
ETS6

The Gira S1 app simplifies the remote maintenance and remote diagnosis of KNX systems with the ETS.

It establishes a connection with the remote access device in the system so that it can be used remotely as a KNX/IP interface.
Supported devices for this function:
- Gira S1
- SMART CONNECT KNX Remote Access

The app also enables the import of KNX data logger files from the device into the ETS bus monitor.
Supported devices for this function:
- Gira S1
- Gira KNX IP router
- SMART CONNECT KNX Remote Access

Developer website
http://www.gira.de

Version info
1.1.0.333

Available for
ETS5
ETS6

A plugin of configuration DALI bus deveice by KNX bus

Developer website
http://www.gvssmart.com

Version info
1.3.2.5

Available for
ETS5
ETS6

The KNX Advanced Course Documentation consists of the following chapters:

  • Fail-safe planning
  • Flags
  • Heating
  • Integrated applications
  • Interworking
  • Coupler
  • Lighting Control
  • Security Technology
  • Logic Operations
  • Visualisation systems
  • ETS Apps
  • KNX & Multimedia
  • KNX and Smart Metering/Smart Grid

Version info
01.06

Related products
Advanced course documentation eBook

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Developer website
http://www.abb.com/knx

Version info
1.1.2.1270

Available for
ETS5
ETS6

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Developer website
http://www.busch-jaeger.de

Version info
1.1.2.1270

Available for
ETS5
ETS6

Create group addresses and link them in one step – directly in ETS 6, consistently named according to your own scheme.

What for?

Blind, switching, dimming and heating actuators with many channels quickly need dozens of group addresses, all named according to the same pattern and each linked to exactly one object. Instead of spreadsheets, copy and paste or manual work, you select the communication objects in ETS, click a middle group and then “Create group addresses”:

  • a new group address is created in the selected middle group for every selected object,
  • the object is linked immediately,
  • name and description follow your scheme,
  • the preview shows every name before anything is created.

Names according to your scheme

Placeholders such as {text}, {name}, {function}, {description}, {middlegroup} and {maingroup} build the name from the data of the object and the target group, e.g. “{text} - {function}” → “Living room blind - Up/Down”. Substrings ({text:0:6}) and transformations (upper and lower case, shortening, replacing) can be combined. A second scheme fills the description of the group address. Frequently used schemes are saved as templates.

Blocks and gaps

If desired, the app arranges the addresses in blocks – by name, text, function or description, for example one block per room or channel. Between the blocks it creates placeholder addresses or leaves addresses free: a fixed number or up to the next block of 5 or 10.

Search and replace

Replacement rules harmonise names without changing the object texts in ETS – in the entire name or specifically in a single placeholder. “blind” becomes “BL”, “Stop/Slat adjustment” becomes “Stop/Slat”.

Excluding objects

Spare channels, disable or diagnostic objects often need no address. Using patterns such as “Spare*”, the app skips them automatically.

Runtime variables

Floor, building section or trade are not stored in the object? With {variable|Floor} the app asks for the value when creating – so one scheme fits the whole building.

Your data stays on your computer

The app works exclusively locally in your ETS: no internet connection, no account, no telemetry, no transmission of project data. It only changes your project and does not communicate with the KNX bus. Existing group addresses remain unchanged.

Languages and help

User interface and help in German, English, Spanish, French and Italian – matching the ETS language. The detailed help with step-by-step instructions, examples and screenshots is included in the app and works offline.

New in version 2.0.0.0

  • Description scheme for the description of the group addresses
  • Search and replace, in the entire name or per placeholder
  • Ignored addresses using patterns
  • Runtime variables
  • User interface and help in five languages

Requirements

  • ETS 6 with a licence that supports ETS apps
  • Project with a three-level group address structure (main group / middle group / group address)

Manufacturer: Splendid Minds GmbH · Support: support@splendidminds.de

Developer website
https://www.splendidminds.de

Version info
2.0.0.0

Available for
ETS6

The ise RF Insight app can be used to analyse wireless installations featuring KNX RF Multi and RF Ready/RF+ devices. It provides troubleshooting guidance, and measurement results can be documented for system integrators or customers.

The app can be used from ETS 6.4 onwards, provided a KNX RF Multi/TP media coupler is installed in the RF line or segment.

Developer website
http://www.ise.de

Version info
1.1.0.246

Available for
ETS6

The KNX Specifications cover all technical topics of the KNX Standard, from the first contact with the KNX technology, through the specification, certification rules and testing, and application descriptions. The different Volumes and Parts are clearly separated, and intended for the various responsibilities within a company.

Content of the KNX Handbook

  1. Guide for Development
  2. System Specifications
  3. Hardware Specifications and Tests
  4. Certification
  5. Profiles
  6. Application Descriptions
  7. System Conformance Tests
  8. Standardised Components & Devices and Tests
  9. Application Domain specific Standards

PLEASE NOTE: this is the public version (3.0.0) of the KNX Specifications. KNX Members have access in their MyKNX account to the very latest version of the KNX Specifications, which is currently v3.0.3. This version is updated at regular intervals with the latest evolutions of the parts, volumes and application notes.

GPT available in ChatGPT store: GPT - KNX Specifications Navigator

Disclaimer
This GPT-based assistant is provided as an aid for individuals and companies interested in developing KNX solutions based on the KNX Specifications. It is currently in a testing phase and should not be considered a definitive or authoritative source of information.
While this assistant aims to provide guidance based on the KNX Specifications v3.0 and the KNX Development Guide, users are strongly advised to verify all technical details, processes, and compliance requirements against the official KNX documentation.
The KNX Standard and its specifications are complex, and incorrect interpretations may lead to development errors or non-compliance with KNX certification requirements. For the most accurate and up-to-date information, always refer to the original KNX Standard documents (available to KNX Members) and consult KNX Association resources when necessary.
By using this assistant, you acknowledge that it is provided "as is" without any warranties, and the responsibility for verifying the information remains with you.

Developer website
http://www.knx.org

Version info
3.0.0

KNX Association also offers the latest version of the KNX Tutor Course Documentation on paper. The KNX Tutor Course Documentation consists of the following chapters:

  • KNX Requirements for Training Centres
  • Structure and Scope of KNX Association
  • KNX Software
  • History of Bus Systems
  • Serial data transmission & KNX Protocol
  • Microcontrollers
  • Application program
  • KNX Certification Scheme for products

Version info
01.06

Related products
Tutor course documentation eBook

The edition of the ‘Handbook for Home and Building Control, Basic Principles‘ takes into account the extended possibilities of the KNX System in applications, products and functions.

Version info
5 or 6

Related products
Handbook eBook

With the ETS App Labels, device labels based on forms can be printed as stickers. The information (Individual Address, mounting, function, etc.) is taken directly from the ETS project. This not only facilitates the work of the installer or system integrator, but also provides consistent overview within distribution boards and cabinets. Please note that an installed version of Microsoft Word is needed for printing the labels.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

With ETS App Device Compare you can compare the an individual device from the installation with the available data in the corresponding ETS project. In this way the current state as in the installation can be compared with the expected state as in the ETS project. Dissimilarities in device configuration will be shown and the result can also serve as evidence in case a third party has tampered with the installation.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

All changes made in projects (except changes that have been made by device plug-ins) are registered in chronological order in the project history automatically. By licensing the Project Tracing app, you can see all the automatically created entries. This App can also serve to monitor the progress of projects under construction.
- You can find more information here

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

With the ETS App Replace Device, you can replace KNX devices while keeping their Group Addresses. This is possible for devices with similar functionality, regardless of the manufacturer.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

With the ETS App Split & Merge, a project can be split into two, three or more parts. Several ETS users can edit them independently and merge again them after completion of the entire project. This works also with unrelated projects, so that it can be merged.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

The ETS App Extended Copy is used to quickly create similar structures in a project. During the copy process, a dedicated dialog will allow devices, bus lines, even complete building parts together with their destination address assignments, configuration, Group Addresses, links, text descriptions and other information to be adjusted. Thereafter, the configuration is inserted seamlessly.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

With the ETS App My Device Templates you can configure devices in your project, save the configuration as template and then reuse it in other projects as well so that you do not have to configure the devices again and again in the same way.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

The ETS App Device Reader can be used in order to read out the memory and the properties of devices, which will provide the user with crucial and possible clarifying information. This information can also be saved as a file.
Video presentation (EN)

Developer website
http://www.knx.org

Version info
1.0.804.51129

Available for
ETS5
ETS6

The Reconstruction tool can be used to read out devices in the installation and then create a new ETS project or update an existing project. You may also compare the data from the installation against an ETS project.
This allows to work on projects where the ETS database has been lost or is out of date. This will also work for installations which were created with a previous version of ETS.

These items can be reconstructed: topology, devices with individual address, application program, parameter settings and group object flags, priority and assigned group addresses. You need bus access and same product data which were used to program the devices.
Building or trade structure as well as name and description texts of areas, lines, devices and group addresses will not be reconstructed because they were not programmed into the device.

Note: Devices with plug-ins can only be read out / reconstructed, if supported by the manufacturer of the plug-ins. In case of doubt please contact the manufacturer or our support.
Devices whose product data cannot be used in the current ETS can not be reconstructed.

For more info see https://www.it-gmbh.de/en/ under Products - KNX - ETS Apps
The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.1.17

Available for
ETS5
ETS6

Shift Addresses helps you to re-structure Group Addresses and Individual Addresses in an ETS project, e.g.
- Shift addresses to make room for a new function but still keep an established addressing scheme
- Create gaps between addresses to allow for future extensions or to produce a clean and logical addressing scheme
The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.0.1468

Available for
ETS5
ETS6

Project Data Exchange helps you to transfer ETS project data like topology, Group Addresses and building structure by exporting and importing
* between ETS projects
* between ETS and other tools (e.g. CAD programs)
The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.1.13

Available for
ETS5
ETS6

For full system visualisation, telegrams shall be allowed to pass the line coupler. To this end, a dummy device is inserted in the ETS project. It contains all the Group Addresses required by the visualisation system. The ETS takes the Group Addresses from the dummy device into account when creating the filter tables.

Fill VisualizationDummy helps you to link a dummy device in the ETS with a list of Group Addresses for a visualization.
Product data for dummy devices can be obtained from several manufacturers.

The information about the group addresses can be read either from a file (different formats are supported), or the group addresses can be selected from the current ETS4 project by drag and drop.
The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.1.2

Available for
ETS5
ETS6

/!\ Only works till ETS 6.3.0 /!\

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB BuildingPro Edge, which is a solution hosting applications such as ABB BuildingPro Vision, used for monitoring and control of buildings.

Developer website
http://www.abb.com

Version info
2.0.0.1

Available for
ETS6

This ETS App is intended to exchange Group Address information of Busch-ComfortTouch® panels from Busch-Jaeger or ABB between ETS and IPP. The ETS App provides IPP data with recent changes in ETS and vice versa ETS data in IPP. By pressing the import button you can import XML files that were created by IPP into ETS. Using the export button you can generate an XML file for import into IPP.

Developer website
http://www.busch-jaeger.de

Version info
4.0.204.0

Available for
ETS5
ETS6

"Check and Improve" helps you ensure and improve the formal quality of your ETS projects. This includes the verification and semi-automatic correction of spelling, configurable naming conventions, and the assignment of Datapoint types.
Without much effort, the project gets more clearly arranged, better maintainable and will be the perfect base for further use, e.g. for a visualization.

Some details:

The Spell checker can make use of many freely available dictionaries in lots of languages e.g. from the OpenOffice and Mozilla projects, plus user dictionaries for additional words.

The naming conventions can be defined by combining building blocks like "alternative", "concatenation", "list of allowed names", "list of names from project", "pattern" etc. to a rule.

The Datapoint type assignment has access to an online database with information currently about approx. 1000 application programs (continuously growing).

The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.0.1445

Available for
ETS5
ETS6

Reactivates the protocol EIBlib/IP in ETS (not standardised and since KNXnet/IP redeemed). With this ETS App the establishment of an ETS connection using with this protocol is again possible.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS5
ETS6

Siemens offers the possibility to exchange data from SIMATIC S7 PLC to KNX systems via KNXnet/IP interfaces. This ETS App enables the user to export a Group Address data (Main addresses 0-15) from ETS in a CSV file which can be imported to Siemens KNX2S7 Editor. The additional available KNX2S7 Editor creates required data for SIMATIC S7.

Developer website
http://www.siemens.com/knx

Version info
1.0.2409

Available for
ETS5
ETS6

The ETS App Function Test supports you in function test / acceptance of a finished KNX project:

  • At any time, it is clearly visible which functions are tested and with which result.
  • The results can be printed as report.
  • For the function types Switching, Dimming, Sun protection and Heating, pre-defined "Mini-Visualizations" are available making it easy to view and modify the current states.
  • It is possible to control the App from iOS or Android-based mobile devices with the help of the "Elvis Viewer" app.
    The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.1.18

Available for
ETS5
ETS6

The Griesser GPA (Griesser Protocol Analyzer) app can decode, record and save KNX bus telegrams of the type 6-byte Griesser object. The GPA app works as a supplement to the Bus or Group Monitor integrated in the ETS. The Griesser GPA app must be launched separately from the Bus or Group Monitor and simultaneously records all KNX telegrams. As it does so, the Griesser object telegrams are recorded in decoded form. The GPA app offers the same functions as the Bus and Group Monitor except that it interprets the proprietary Griesser 6-byte object and decodes the sectors, the priority and the command.

Developer website
http://www.griesser.ch

Version info
1.3.0

Available for
ETS5
ETS6

With the “WAREMA KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects.

With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.

“KNXMCM BAline Studio Exchange” can in each case be run for only one device.

If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.

Developer website
http://www.warema.de

Version info
1.4.4.0

Available for
ETS5

The KNX RF Field Strength Analyzer (KNX-RF-FSA) app is taking the innate uncertainty of KNX RF installations. By gathering the Received Signal Strength Indicators (RSSI) of all user-selected RF devices and displaying them in a colour-coded matrix, the KNX-RF-FSA makes testing and debugging of KNX RF device connections easier than ever before. Designed to be used for short and long-term observations of the device’s RSSIs, the KNX-RF-FSA is a high-quality tool that can highlight any weaknesses in a KNX RF installation. This tool also tests the functionality of activated repeater for increased area coverage to avoid future problems. The RF FSA is all you need for successfully commissioning your KNX RF installation. Available in MyKNX.

Developer website
http://www.tapko.de

Version info
1.6.0.1

Available for
ETS5
ETS6

This App will automatically create a snapshot of your ETS project (as knxproj) in a specified, project-specific location.

This is useful if you are working with several projects and want to
- include versions of the projects in a backup solution
- synchronize the versions with a cloud service (e.g. Dropbox®)
- deploy the project to a location accessible by other persons or tools

ETS5 has a similar facility named "recovery points". In contrast to the AutoBackup App, recovery points are not stored in project-specific folders and thus do not provide client isolation.

The current app version works only from ETS 5.7.2! The app is available for ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.1.3

Available for
ETS5
ETS6

This app synchronizes the KNX-Gate 3 projects of the Insta KNX Gateway RS232/485-IP with an ETS Project.

Developer website
http://www.insta.de

Version info
1.0.0.0

Available for
ETS5

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS5 Professional is required.

Developer website
http://www.se.com

Version info
3.1.0.67

Available for
ETS5

This App is needed for configuration of the BJE 6186/40 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All 6186/40 in the project can be processed at the same time. The download into the device is done by normal ETS download.

Developer website
http://www.busch-jaeger.de

Version info
1.0.32.0

Available for
ETS5
ETS6

The edition of the ‘Handbook for Home and Building Control, Basic Principles‘ takes into account the extended possibilities of the KNX System in applications, products and functions.

Version info
5 or 6

Related products
Handbook

DCA for commissioning the MDT DaliControl Gateway DALI16 or the MDT DaliControlGateway32.
This DCA can be used to commission and configure the DALI devices. The DALI subscribers can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Developer website
http://www.mdt-group.com

Version info
2.1.4.0

Available for
ETS5

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

Developer website
http://www.abb.com/knx

Version info
1.0.194.0

Available for
ETS5
ETS6

‘eConfigure KNX Student’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://ecobuilding.schneider-electric.com/products/light-and-room-control/knx-system/econfigure-knx-lite/technical-documentation#tab/documents

Developer website
http://www.se.com

Version info
3.1.0.67

Available for
ETS5

Compare your current ETS project with an earlier version of the project (knxproj file or restore point) and get a detailed list of all differences for each individual project element. Jump directly from the difference list to the corresponding element. Many options control details of the comparison.
The current app version works only from ETS 5.7.2! You cannot use the app with ETS6.

Developer website
http://www.it-gmbh.de

Version info
5.0.1436

Available for
ETS5

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

Developer website
http://www.busch-jaeger.de

Version info
1.0.191.0

Available for
ETS5
ETS6

KNX Virtual is a Windows application representing a KNX installation, i.e. it is not a physical installation but it behaves like one.

The advantage is that no investment in hardware (i.e. KNX power supply, KNX/USB interface or KNX/IP interface, KNX devices) needs to be made in order to test and play with KNX & ETS.

Developer website
http://www.knx.org

Version info
2.6.1

This application allows the download of custom images to be used as screensaver in Zennio Z28, Z35, Z35 H, Z35 v2, Z35 v3 and Z40 touch panels.
The image dimensions must be 320x240 pixels. Supported formats: png, .jpg, .jpeg and .bmp.

Developer website
http://www.zennio.com

Version info
3.0.21

Available for
ETS5
ETS6

Device Configuration App (DCA) for IPAS DALIControl e64
Order No.: 4101-145-01
Application: DaliControl e64-01-0310

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.ipas-products.com/

Version info
1.1.2.0

Available for
ETS5

Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.theben.de

Version info
1.1.3.0

Available for
ETS5
ETS6

With the WAREMA KNX SMI multiple actuators in surface-mounted or DIN rail-mounted housing, up to 16 SMI LoVo drives can be controlled independently of one another or in up to 16 groups. The manual override operation and status display of the binary inputs via the Bluetooth App and DCA App is unique and, additionally, operation is possible on the actuator itself. Commissioning and motor search/allocation is done via smartphone or the ETS DCA App. This app can also be used to read out and acknowledge the SMI Motor error list or to learn in tilt pulses.

https://youtu.be/EiAx1fra4ME

Developer website
http://www.warema.de

Version info
1.6.1

Available for
ETS5
ETS6

This ETS-APP is a tool that allows updating the operating system of some KNX Zennio devices through ETS without having to send them to the factory.

The OS update does not involve a change of functionality or version of the ETS application program, but updates a lower memory layer.
These updates are usually not necessary throughout the lifetime of the product unless there is a behaviour that cannot be changed with a new version of the application program via ETS.
In case you need to use this APP, our support team will have provided you with the necessary files (.bin).
Download the App manual: https://www.zennio.com/download/manual_fw_updater_en

If you want to update the ETS application program version, you can copy parameters and object links using the Zennio Parameter Copier application, also available in the KNX online shop.

Developer website
http://www.zennio.com

Version info
1.2.1

Available for
ETS5
ETS6

The Weinzierl KNX Modbus Gateway ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl KNX Modbus RTU Gateway 886 database and import it into another gateway. This saves a tedious manual configuration.

Developer website
http://www.weinzierl.de

Version info
1.2.1

Available for
ETS5
ETS6

The ETS app JUNG IPS-Remote enables the remote maintenance of KNX installations via the Internet after local approval by the customer.
The connection is established by the JUNG KNX IP Secure interfaces. The remote maintenance works independent of the type of internet connection and doesn´t require any configuration of the local network environment.
After release via a communication object, the IP interface establishes a connection to the Remote Access Server (RAS). The ETS app JUNG IPS-Remote also connects to this server and sets up the corresponding connection.
To establish an encrypted connection between the ETS and the remote IP interface, the new IPS-Remote connection must be used.

Developer website
http://www.jung.de

Version info
1.0.14

Available for
ETS5
ETS6

The app is used for the convenient configuration of SmartTouch, RoomTouch and IPTouch.

Developer website
http://www.busch-jaeger.de

Version info
1.3.11.0

Available for
ETS5
ETS6

The app is used for the convenient configuration of SmartTouch, RoomTouch and IPTouch.

Developer website
http://www.abb.com/knx

Version info
1.3.11.0

Available for
ETS5
ETS6

Device Configuration App (DCA) for IPAS DALIControl e64 Pro
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.ipas-products.com/

Version info
1.2.1.0

Available for
ETS5
ETS6

The ETS app "BJE Firmware Update 2.0" serves for updating the firmware of different Busch-Jaeger KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

Developer website
http://www.busch-jaeger.de

Version info
2.0.175.0

Available for
ETS5
ETS6

The ETS app "ABB Firmware Update 2.0" serves for updating the firmware of different ABB KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

Developer website
http://www.abb.com/knx

Version info
2.0.175.0

Available for
ETS5
ETS6

ETS APP: JUNG KNX Secure Key Loader

Note:
JUNG supports you in building up know-how about KNX Secure! We cover the hardware and software measures offered by KNX Secure in webinars. After successful completion you can receive a voucher that reduces the purchase price of this app. Further information is available at: www.jung.de/contact-knx-secure

Content:
In order to securely integrate the scanned device certificates into the ETS, the installer transfers the JSON files created with the JUNG KNX Secure Scanner to his computer. Several files can come together there, which he archives and imports into the ETS project using the ETS app JUNG KNX Secure Key Loader. This extension is available via the KNX Association App-Shop and is bound to the ETS dongle. The installation is performed via the App menu in the main menu of ETS 6 Professional.

Developer website
http://www.jung.de

Version info
1.0.43

Available for
ETS5
ETS6

This app is used to update firmware of HMS devices. The graphical user interface allows you to choose devices within a KNX line and update them with the newest firmware.

Developer website
http://www.intesis.com

Version info
1.0.3.0

Available for
ETS5
ETS6

This application enables advanced configuration and commissioning of the DALI ballasts with the Zennio DALI-BOX Interface v2.

Developer website
http://www.zennio.com

Version info
1.0.21

Available for
ETS5
ETS6

The Siemens Channel Multiplier App allows the transfer of parameters from one channel to one or more other channels between products included in an ETS project. The user defines one channel of a product as the reference channel and determines all identical channels to be parameterized identically. Changes in the reference channel will automatically be copied to the selected identical channels.

Developer website
http://www.siemens.com/knx

Version info
1.3.108.0

Available for
ETS5
ETS6

Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.theben.de

Version info
2.1.2.1

Available for
ETS5

Theben Firmware Update App is a maintenance tool that allows you to update specific Theben KNX devices to a newer firmware version in case of bugfixes, new functionality and so on. Your application data and settings will not be removed.

Developer website
http://www.theben.de

Version info
2.0.4

Available for
ETS5
ETS6

Device Configuration App (DCA) for IPAS DALIControl gc16plus (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-1 Plus_V1.1.0, DaliControl gc16-2 Plus_V1.1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.ipas-products.com/

Version info
4.0.1.0

Available for
ETS5
ETS6

The ETS App “Zennio Parameter Copier” is a tool which helps in the versions update process of Zennio products. This tool allows to copy parameters and group objects associations between different products versions, making the updating process faster.
Download the App manual:
https://zennio.com/download/manual_parameter_copier_en

Attention:

This tool is a beta application version which has been published to facilitate maintenance and updating tasks to Zennio clients.

The copy could not work properly since it depends on the internal application program construction, which can vary between versions just a little bit or a lot, so it is highly recommended to double check it to verify that the copy process has been successful.

Developer website
http://www.zennio.com

Version info
1.1.1

Available for
ETS5
ETS6

KNX Association also offers the latest version of the KNX Tutor Course Documentation on paper. The KNX Tutor Course Documentation consists of the following chapters:

  • KNX Requirements for Training Centres
  • Structure and Scope of KNX Association
  • KNX Software
  • History of Bus Systems
  • Serial data transmission & KNX Protocol
  • Microcontrollers
  • Application program
  • IP Communication
  • KNX Certification Scheme for products

Version info
1.0

Related products
Tutor course documentation

Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2

Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.

Developer website
http://www.theben.de

Version info
1.1.2.0

Available for
ETS5
ETS6

Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

Developer website
http://www.theben.de

Version info
1.1.1.0

Available for
ETS5
ETS6

The app is used for convenient configuration of SmartTouch 10.

Developer website
http://www.abb.com/knx

Version info
1.1.24.0

Available for
ETS5
ETS6

The app is used for the convenient configuration of SmartTouch 10.

Developer website
http://www.busch-jaeger.de

Version info
1.1.24.0

Available for
ETS5
ETS6

The Weinzierl Modbus TCP Gateway 716 ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl Modbus TCP Gateway 716 database and import it into another gateway. This saves a tedious manual configuration.

Developer website
http://www.weinzierl.de

Version info
1.0.1

Available for
ETS5
ETS6

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS6 Professional is required.

Developer website
http://www.se.com

Version info
3.1.0.67

Available for
ETS6

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

Developer website
http://www.insta.de

Version info
2.0.3.1653

Available for
ETS5
ETS6

Blumotix s.r.l.
Device Configuration App (dca) for BX-DALI-PLUS (AV06)
Order number: BX-DALI-PLUS
Application: BX-DALI-PLUS (AV06)
Device configuration DCA for the dali bus definition. The application is used to configure only DT6 dali devices, first enumeration, post-installation, groups and scenes.

Developer website
http://www.blumotix.it/en

Version info
1.2.3.311

Available for
ETS5
ETS6

This App allows the ETS user to perform firmware upgrades for Hager and Berker product.

Developer website
http://www.hager.com

Version info
1.2.3.1541

Available for
ETS5
ETS6

Device Configuration App (DCA) for Gewiss GW90873 - Gateway KNX/DALI 64/16 advanced

Developer website
http://www.gewiss.com

Version info
1.2.1.0

Available for
ETS5
ETS6

Device Configuration App (DCA) for IPAS DALIControl e64 Pro V2
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro_V2.1.0

Support of Input Devices
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.ipas-products.com/

Version info
2.2.0.0

Available for
ETS5
ETS6

This Gira Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the Gira DALI Gateway Colour (order number 2111 00, 2112 00). This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software beyond the ETS.

Developer website
http://www.gira.de

Version info
2.0.0.1471

Available for
ETS5
ETS6

Device Configuration App (DCA) for Ekinex KNX/DALI gateway EK-BF1-TP-D1 (1 channel) or EK-BF1-TP-D2 (2 channels)
Order No.: EK-BF1-TP-D1 DALI2 1CH, EK-BF1-TP-D2 DALI2 2CH
Application: APEKBF1TPD1_V1.1.0, APEKBF1TPD2_V1.1.0

Coloured light control including device type 8 ECGs
Colour temperature (DT-8 Sub-Type Tc)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
DT-8 Sub-Type PrimaryN is not supported.

Developer website
http://www.ekinex.com

Version info
1.1.2.0

Available for
ETS5
ETS6

Device configuration application for PLC-based WAGO devices.

Developer website
http://www.wago.com

Version info
1.2.0.0

Available for
ETS5
ETS6

The app is used for the convenient configuration of 2.4" Display (Trevion, alba, SIDUS, SAGA).

Developer website
http://www.busch-jaeger.de

Version info
1.1.4.0

Available for
ETS5
ETS6

The app is used for the convenient configuration of 2.4" Display (Trevion, alba, SIDUS, SAGA).

Developer website
http://www.abb.com/knx

Version info
1.1.4.0

Available for
ETS5
ETS6

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB BuildingPro Edge, which is a solution hosting applications such as ABB BuildingPro Vision, used for monitoring and control of buildings.

Developer website
http://www.abb.com

Version info
2.0.0.1

Available for
ETS5

Application area:

With the GPLA app, projects from the Gira Planning Assistant can be conveniently transferred to ETS. The transfer can be carried out using a transfer code or a file from the Gira Planning Assistant.

In addition, project files for the Gira X1 can be automatically generated for import into the Gira Project Assistant (GPA).

Developer website
http://www.gira.de

Version info
2.0.0.61

Available for
ETS5
ETS6

ESTADA is your planning software for easy, fast and intuitive planning of KNX projects. Plan your project with a graphical drag & drop interface in no time without tedious work in ETS.
With ESTADA, getting started with KNX is easier than ever as it takes care of all the parameterization and eliminates the need to work in ETS. Ideal for newcomers who do not want to complete an ETS course and highly appreciated by KNX professionals who want to rapidly plan complex KNX projects.

The plan-related user interface allows a clear planning of all consumers and their connection with actuators and scenes to complete functions. Not only a fast and clear planning is guaranteed, but also a reliable documentation. Function lists, component lists and room plans enable a seamless transfer of the planning phase to the execution. Of course, planning with several members is also possible.

Export the entire project as a project file directly to ETS or push your planning progress directly with our ETS app.

KNX has never been easier!

Developer website
http://estada.de

Version info
1.8.0

Available for
ETS6

This application enables advanced configuration and commissioning of DALI ECGs through Zennio DALI devices.

Developer website
http://www.zennio.com

Version info
3.1.2

Available for
ETS5
ETS6

Theben DALI-Gateway P64 V2 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX V2

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

Developer website
http://www.theben.de

Version info
2.1.2.0

Available for
ETS5
ETS6

Device Configuration App (DCA) for DALI KNX Gateway 64/128 (1 or 2 Channel)
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Developer website
http://www.modulyte.com

Version info
4.0.0.0

Available for
ETS5
ETS6

This Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the DALI Gateway Color. This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software outside the ETS.

https://www.Feller.ch

Developer website
http://www.feller.ch

Version info
2.0.2.1533

Available for
ETS5
ETS6

Project Access Assistant is a cutting-edge app developed by KNX Association to streamline and secure the management of ETS project passwords. This app uses encryption to ensure sensitive credentials are robustly protected and safely stored within your MyKNX account.

Developer website
http://www.knx.org

Version info
1.0

Available for
ETS6

‘eConfigure KNX Student’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://ecobuilding.schneider-electric.com/products/light-and-room-control/knx-system/econfigure-knx-lite/technical-documentation#tab/documents

Developer website
http://www.se.com

Version info
3.1.0.67

Available for
ETS6

DALI-2 System Config Tool(Hereinafter referred to as DCA) is a plugin of the ETS software for configuring DALI gateway, embedded in the application of DALI gateway, to conveniently debug and configure function of DALI gateway, and address DALI device.

Developer website
http://www.gvssmart.com

Version info
1.0.0.8

Available for
ETS5
ETS6

The BSS Firmware Update App enables the firmware of KNX devices to be updated easily and securely. With its intuitive user interface and automatic detection of the devices, it ensures a smooth update process.

Developer website
https://bss-sdi.com/

Version info
1.1.0.28

Available for
ETS6

o Device Configuration App (DCA) for SIEMENS KNX/DALI Gateways N 141/14 & N 141/32 V.01
o Order nr.: 5WG1141-1AB14, 5WG1141-1AB32
o The fully ETS-integrated Device Configuration App (DCA), which complements the standard parameter dialog, is used for DALI commissioning and DALI testing with the KNX/DALI Gateways N 141/14 and N 141/32. This allows for the identification, addressing, and assignment of DALI operating devices and DALI-2 sensors using the familiar ETS environment, without needing additional software besides ETS.
o For more information about DCA installation, please refer to the application program description on https://www.siemens.com/knx-td

Developer website
http://www.siemens.com/knx

Version info
2.0.68.10670

Available for
ETS5
ETS6

KNX-DALI-2 Gateway Configuration V2(Hereinafter referred to as DCA) is a plugin of the ETS software for configuring DALI gateway, embedded in the application of DALI gateway, to conveniently debug and configure function of DALI gateway, and address DALI device.

Developer website
http://www.gvssmart.com

Version info
2.1.3.6

Available for
ETS5
ETS6

Bulk Linker App – Professional Mass Linking for Large-Scale Projects

The Bulk Linker App was developed specifically for experienced system integrators who regularly implement large and complex KNX installations. While the free Multi Linking feature in ETS 6.4.0 simplifies linking existing groups, Bulk Linker goes one step further.

Key Features:
- Automatic creation of new group addresses
- Customization of group addresses before creation
- Intelligent 1:1 linking with group objects
- Bulk import of serial numbers

Ideal for: High-rise buildings, campus installations, hotels, multi-dwelling units, and other large projects with hundreds or thousands of links.
Save time, increase efficiency, reduce errors.

Developer website
http://www.knx.org

Version info
6.4.8702

Available for
ETS6

This Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialogue, is used for internal device linking.
For use with the following JUNG products: 2590M1SR / 2570M1SR

Developer website
http://www.jung.de

Version info
1.0.0.380

Available for
ETS5
ETS6

This app allows you to connect Hager KNX radio products to a KNX installation using the TR131N radio frequency-TP gateway.

Developer website
http://www.hager.com

Version info
1.0.0.7

Available for
ETS6

This DCA is used for commissioning and testing the DALI system via the Blumotix BX-DALIPRO2 Gateway.
It is a Device Configuration App fully integrated into the ETS (DCA), which also includes the standard parameter dialog
Thanks to this integration, it is possible to identify, address and assign DALI control devices and sensors directly within the ETS environment, without the need for external software to the ETS system.

Developer website
http://www.blumotix.it/en

Version info
v2.0.2.1495

Available for
ETS5
ETS6

Blumotix Secure Device Firmware Update (DFU)
This ETS App allows you to update the internal firmware of all Secure Blumotix devices.

Developer website
http://www.blumotix.it/en

Version info
1.0.3.180

Available for
ETS6

The ise Remote Access app simplifies the remote maintenance and remote diagnosis of KNX systems with the ETS.

It establishes a connection with the remote access device in the system so that it can be used remotely as a KNX/IP interface.
Supported devices for this function:
- SMART CONNECT KNX Remote Access
- Gira S1

The app also enables the import of KNX data logger files from the device into the ETS bus monitor.
Supported devices for this function:
- SMART CONNECT KNX Remote Access
- Gira S1
- Gira KNX IP router

Developer website
http://www.ise.de

Version info
1.1.0.333

Available for
ETS5
ETS6

With the WAREMA KNX secure SMI multiple actuators in surface-mounted or DIN rail-mounted housing, up to 16 SMI LoVo drives can be controlled independently of one another or in up to 16 groups. The manual override operation and status display of the binary inputs via the Bluetooth App and ETS DCA App is unique and, additionally, operation is possible on the actuator itself. Commissioning and motor search/allocation is done via smartphone or via ETS DCA App. This app can also be used to read out and acknowledge the SMI Motor error list or to learn in force fit span or in tilting span.

Developer website
http://www.warema.de

Version info
1.0.7

Available for
ETS5
ETS6

DCA for xxter applications, to automatically synchronize with the xxter cloud service.

Developer website
http://www.xxter.com

Version info
1.0.2

Available for
ETS5
ETS6

To carry out the DALI commissioning and the DALI test to the Stiliger DALI Gateways this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI control devices (sensors) by using the familiar ETS environment without having to use additional software beyond the ETS.

Developer website
http://stiliger.com/

Version info
2.0.3.1760

Available for
ETS5
ETS6

onework SCAN helps you quickly and reliably assess the status of your ETS project. The app identifies devices without a valid individual address as well as unreachable participants, providing a clear overview of the current project status.

Unlike the free onework SCAN Lite, the full version is designed for auditing larger projects and enables a comprehensive analysis without the 20-device limit. You receive both a compact project overview and detailed results at the device level. This supports efficient error analysis, targeted filtering, and clear documentation of the project status.

If you’d like to test the features first, you can start with onework SCAN Lite for free and check up to 20 devices. This allows you to evaluate the app’s benefits directly in your own ETS project before using the full version.

Available in the ETS Apps Store by searching for “oneworkSCAN.” The official product name is onework SCAN.

Developer website
http://www.onework.de

Version info
1.0.2513.0

Available for
ETS6

onework SCAN Lite is the free entry-level version of onework SCAN. The app helps you analyze your ETS project by checking up to 20 devices simultaneously. It reliably identifies devices without a valid physical address as well as unreachable devices.

The app provides a compact project overview and detailed test results at the device level. This allows you to efficiently analyze errors, filter them specifically, and comprehensively document the current project status.

Available in the ETS Apps Store by searching for “oneworkSCAN Lite.” The official product name is onework SCAN Lite.

Developer website
http://www.onework.de

Version info
1.0.2513.0

Available for
ETS6

o Device Configuration App (DCA) for SIEMENS KNX/DALI Gateways N 141/14 & N 141/32 V3.0
o Order nr.: 5WG1141-1AB14, 5WG1141-1AB32
o The fully ETS-integrated Device Configuration App (DCA), which complements the standard parameter dialog, is used for DALI commissioning and DALI testing with the KNX/DALI Gateways N 141/14 and N 141/32. This allows for the identification, addressing, and assignment of DALI operating devices and DALI-2 sensors using the familiar ETS environment, without needing additional software besides ETS.
o For more information about DCA installation, please refer to the application program description on https://www.siemens.com/knx-td

Developer website
http://www.siemens.com/knx

Version info
3.0.6156.10726

Available for
ETS6

Your AI assistant right inside ETS 6: you say what you need – ETSpilot does it in your open project.

Building the project

Room list, quotation, distribution board plan, the customer’s e-mail or a photo of the distribution board: give ETSpilot what you already have. The assistant reads your documents, understands your project and works directly in the ETS:

  • creates the building structure, areas and lines,
  • picks the right devices from the catalogue – including those whose product data has not been imported yet,
  • creates group addresses according to your scheme and links the objects,
  • assigns rooms and trades
  • and programs the devices on the bus.
    Whatever is unclear, it asks instead of guessing. You keep working in the ETS alongside.

Configuring parameters

Name the goal, not the clicks: “Set the travel time of all blind actuators to 60 seconds.” ETSpilot finds the matching parameters in every device and channel, checks every value against the permitted options of the application and shows you the changes before writing them – with device, parameter, new value and channel.

ETSpilot uses the product data in your ETS and is therefore independent of the manufacturer. Manufacturers can also have their products trained for ETSpilot with us: it then knows the parameters by understandable names and the notes from the manufacturer’s instructions, and shows product cards with picture and manuals. On top comes general KNX knowledge about topology, trades, datapoint types and the structure of an ETS project.

Settings that some manufacturers manage via their own device apps (DCA) or plug-ins are not always accessible.

Checking and documenting

Addresses without a sender, objects without links, inconsistent datapoint types, devices without a room – ETSpilot finds errors before the site does. It maintains completion status, comments, open tasks and the project history at the same time.

Logic editor

Build recurring work as a graphical script from 76 blocks – or let the assistant draft the script. The preview shows every change before it happens. Excel lists and ETS exports go in as CSV, reports come out as CSV. Scripts run without AI and can be reused on any project.

Installations without a project file

If the project file is missing, ETSpilot brings the installation back from the bus: it finds the devices on a line, identifies each product by its application in the ETS catalogue and creates it in the project – with group addresses, links, parameters and flags from the device memory. The bus is only read; nothing is programmed or switched. Uncertain values are marked rather than guessed. Meanwhile a table with address, manufacturer, product and status fills in in the chat, so you can follow the progress at any time. Devices with KNX Data Secure and devices that do not accept a connection cannot be recovered.

On site

The computer stays at the distribution board while you walk through the building with your phone: scan the QR code and control the ETS from the browser – chat, device list with programming status and bus monitor. You can dictate tasks, send photos of devices and type plates straight from the phone chat and take over device certificates (FDSK) for KNX Secure by QR scan.

Values at a glance

Ask for temperatures, humidity or switching states – ETSpilot shows them as easy-to-read cards that update with every bus telegram and record the history as a chart. On the PC and on the phone, read-only.

Where does my project data go?

A fair question – here is the answer before you have to look for it:

  • Your ETS project file does not leave your computer. ETSpilot only reads the parts needed for the current task.
  • Requests pass through our server in Germany (STACKIT), over TLS and additionally encrypted with AES-256. There we enrich them with KNX expertise and your project documents.
  • The AI answers them using your own access – you conclude the contract directly with the provider.
  • No analysis of your projects, no training on your data, no advertising, no tracking.
  • Chat histories are deleted automatically 90 days after last use, documents are stored encrypted. You handle information requests, export and deletion yourself in the portal.

What does my AI see?

For each project you decide which data types never leave your computer – for example project name and customer data, device parameters, security keys or bus communication. Locked data is never read; the related functions are then switched off. ETSpilot never reads KNX Secure keys or project passwords.

You stay in control

In “Ask” mode ETSpilot only reads. In “Agent” mode it may make changes – every writing action is presented to you in plain language for approval first. If you wish, a project backup is created automatically before the first change, and every change carried out can be traced in the chat.

Your AI

You choose the provider: Anthropic Claude, OpenAI or Microsoft Azure AI Foundry – with Azure also with a data centre in the EU. You store your own key and pay the provider directly, without mark-up. You can switch models at any time.

Requirements

ETS 6 on Windows, internet connection, an account at https://account.etspilot.de and your own API key.

Instructions, examples and all details: https://www.etspilot.de/en/dokumentation.html
Data protection and security in detail: https://www.etspilot.de/en/sicherheit.html

User interface and help in German, English, French, Spanish and Italian. Splendid Minds GmbH, Fürth (Germany).

Developer website
https://www.splendidminds.de

Version info
2.1.9.0

Available for
ETS6

To carry out the DALI commissioning and the DALI test to the KNX SECURE DALI GATEWAY INS this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears and DALI control devices (sensors) by using the familiar ETS environment without having to use additional software beyond the ETS.

Developer website
http://ewtr.panasonic.com

Version info
2.0.4.1972

Available for
ETS5
ETS6

Your documents become the KNX project — the ETS app with an intelligent MCP server for ETS 5 and ETS 6.

Building the project

The bill of quantities, room and device lists, distribution board plans, floor plans, the customer's email: hand your AI assistant what you already have. ETS Power Editor gives it hands — and the expertise that goes with them. It works directly in the project you have open:

  • the AI takes devices from the catalogue,
  • creates group addresses and links the objects,
  • assigns rooms and trades
  • and commissions on the bus.

Whatever is not in your documents, it asks about. You keep working in the ETS alongside it.

Parametrising

The app supports your AI just as reliably when parametrising your devices. It is your AI assistant that names the goal, not the route — the app finds that itself. Where the instruction is ambiguous, it presents the options instead of guessing.

For this the app turns the huge product databases of the devices in your ETS into structured information for your AI. You do not have to supply anything else — which also leaves you entirely free in your choice of manufacturer.

The same goes for more complex devices: a smart touch push-button with its pages, tiles and functions just as much as a switch actuator channel. On top of that it comes with general KNX knowledge — for example trades, topology and the way an ETS project is put together.

Device configuration apps (DCAs) that some manufacturers supply for setting up their devices in the ETS are not necessarily supported — their structures are not readily accessible.

Installations without a project file

If the project file is missing, your AI uses the app to recover the installation from the bus: it scans a line, creates the devices in the project and takes over their links and settings. For this, a device's application program must be in the catalogue or be supplied. For now this only works with newer devices and devices without plug-ins; devices with KNX Data Secure cannot be recovered.

KNX Secure

The device certificates for secure commissioning reach the project by scanning with a mobile device — right at installation, also as a team on site, end-to-end encrypted. Or via a sticker sheet that you fill with the stickers and photograph. The certificates never go to the AI. More: https://haar-informatik.de/ets-power-editor/en/geraetezertifikate.html

Where does my project data end up?

Anyone working with AI today is right to ask. So here is the answer, before you have to go looking for it. Here, DATA PROTECTION is top priority! In IT, collecting no data and keeping the rest to a minimum is the simplest protection against data breaches — what is not there cannot be lost either. Anything else makes no sense to us.

  • There is no third party between you and the AI application of your choice - you talk directly to the ETS app in your project
  • You can therefore also use the app with a locally hosted language model — in which case nobody outside gets access to your sensitive data.
  • Your project data is not stored on our servers - because it is never transferred there.
  • Nothing of your work in your project is stored or analysed by us — the app's log stays on your own computer.

What does my AI see?

Of course your AI has to be given the data it is meant to work with.
You can, however, make some of the contents of the ETS project inaccessible to the AI: in the Privacy section you block the entries from the project header — the project name is often your customer's address — and individual device parameters such as stored credentials.
Blocked values never reach the AI at all; all it sees there is "hidden".

Local only by default

The connector runs exclusively on your own computer and out of the box can only be reached from this computer. You open it to other computers in the network only explicitly, after a warning, and even then only with an access key. It starts in read-only mode, you grant write access in the ETS, and every action is written to the log. It only starts once you open the app's tab in the ETS, and it reaches only the projects in which you have done so.

Your AI

Through the open MCP standard (Model Context Protocol) you work with the AI application of your choice: Claude Desktop, Cursor, Antigravity, ChatGPT (Codex) or any other that speaks MCP. You choose and pay for the artificial intelligence yourself.

It also works without an AI application: a script engine for batch commands from Excel.

Reading included

Reading and searching your project is always included. Everything else — above all, anything that changes your project or your installation — can be added monthly through Haar-Informatik and ended any month. Prices: https://haar-informatik.de/ets-power-editor/en/#preise

Guide, examples and full details: https://haar-informatik.de/ets-power-editor/en/

User interface in German, English, French and Spanish. Haar-Informatik, Zirndorf (Germany).

Developer website
http://haar-informatik.de

Version info
1.1.0.7

Available for
ETS5
ETS6

The AUTERAS® planning software generates cross-trade equipment concepts and uses AI to find suitable product combinations that can be automatically configured and integrated to a network. This saves the customer up to 90 % of the design and configuration effort, right down to the ETS!
AUTERAS® captures customer requirements in a natural form and uses them to generate standard-compliant room automation schemes in accordance with VDI 3813, EN 17609 and ISO 16484. The AI then derives implementation proposals using devices from the KNX catalog.

The ETS App from AUTERAS® represents the interface to the online service. For example, it can be used to load the automatically created device combinations from the KNX Online Catalog, configure them fully automatically and link them using group addresses.

Developer website
http://www.auteras.de

Version info
5.0.6.10

Available for
ETS5
ETS6

KNX-MCP – ETS MCP Server with HTTPS for ETS5 and ETS6

Your AI assistant works directly inside the open ETS project.

KNX-MCP 1.2.1.0 is an ETS App with an integrated Model Context Protocol (MCP) server for ETS5 and ETS6. It connects compatible AI assistants to open KNX projects through the official ETS SDK – without exporting the project or creating a separate copy.

New in version 1.2.1.0: bug fixes and program files signed through Microsoft – KNX-MCP now also starts on Windows 11 with Smart App Control switched on.

KNX-MCP supports project analysis, editing, commissioning and troubleshooting of KNX installations. AI assistants work with current ETS project data and, subject to configured permissions, can access devices, group addresses, communication objects, parameters, building structures, topology and the KNX bus.

Direct AI integration and encrypted MCP communication

The redesigned MCP communication layer enables compatible AI assistants to connect directly using Streamable HTTP – often without an additional proxy or bridge.

• Optional HTTPS: The integrated MCP server can encrypt connections when HTTPS is enabled. Certificates can be created in the app or selected from the Windows certificate store.
• Authentication: The access key can be supplied using Authorization: Bearer. Existing X-KnxMcp-Key configurations remain compatible.
• Direct MCP clients: Claude Code, OpenAI Codex, Microsoft Scout, GitHub Copilot and other compatible MCP clients can connect directly.
• Claude App / Claude Desktop: Connection is available through the appropriate desktop integration or a compatible MCP bridge.
• Additional AI services: ChatGPT and Microsoft Copilot can connect to ETS through a suitable MCP gateway.
• Multiple AI agents: Several AI assistants can connect simultaneously. Client connections, tool requests and activity are visible in the ETS live monitor.

The MCP endpoint can be explicitly enabled for access from a trusted local network or intranet. By default, it is accessible only from the local computer. HTTPS, access-key protection and appropriate network restrictions are recommended for network access.

99 MCP tools for ETS projects and KNX automation

KNX-MCP provides 99 MCP tools. Available capabilities include:

• ETS project inspection, quality checks and documentation
• Reading and editing devices, communication objects and parameters
• Creating, linking, copying and renumbering KNX group addresses
• Managing rooms, floors, building structures and KNX topology
• Updating multiple devices or parameters in a single request
• Monitoring KNX telegrams, reading values and sending values with controlled permissions
• Working with KNX Secure certificates and tunnelling addresses of KNX IP interfaces
• Reading DALI gateway configuration from ETS project data
• Importing manufacturer product data into the ETS6 catalog

Many operations support batch processing with one approval and one ETS undo step, where supported by the corresponding ETS operation.

Typical questions and tasks for your AI assistant

• "Which projects are currently open in ETS? Please also list information about each of these projects."
• "Which presence detectors on the second floor are not linked to a lighting group yet?"
• "Which group addresses of the hall lighting have more than one sender?"
• "Create switching, dimming value and status addresses for meeting rooms 2.01 to 2.06."
• "Show me all devices, communication objects and parameters in the meeting room."
• "What is the current temperature in the server room?"
• "Which devices on line 1.1 are currently responding on the KNX bus?"

Full control over project changes and bus operations

You decide which functions your AI assistant may execute. Each tool has one of three permission levels: Allowed, Confirmation required or Blocked.

A project-wide read-only mode prevents project modifications and telegram transmission. Where supported by ETS, project changes are recorded as named undo steps. Sending telegram values requires individual confirmation by default. KNX device programming is blocked by default.

The program files of KNX-MCP are signed through Microsoft, so Windows can verify that they come unchanged from the manufacturer.

Multiple ETS projects, local operation and data privacy

KNX-MCP supports ETS5 version 5.7 or later and ETS6. Multiple open ETS projects can be accessed through a single MCP endpoint.

The application runs directly inside ETS on your computer. There is no central KNX-MCP cloud service through which your ETS project data is routed. You choose which MCP client and AI provider to use and what data that provider may process.

KNX-MCP includes structured tool descriptions and integrated help in six languages. Additional skills are not required for basic operation. Reusable workflows and further guidance are available through the KNX-MCP Community.

KNX-MCP 1.2.1.0 is currently available free of charge in the KNX Online Shop.

Product website – features, screenshots and setup:
KNX-MCP – Product Website
KNX-MCP – Setup and MCP Connection

Release notes – changes in version 1.2.1.0:
KNX-MCP 1.2.1.0 – Release Notes EN/DE

Community – questions, bug reports, documentation and skills:
KNX-MCP Community on GitHub

Product support: support@knx-mcp.com

Developer website
https://docenko.eu

Version info
1.2.1.0

Available for
ETS5
ETS6

DINUY Firmware Update is an ETS6 application that allows updating the firmware of compatible DINUY KNX devices directly from ETS6.

The application provides a simple and guided firmware update process, allowing the user to select the appropriate firmware package and transfer it to the device through the KNX interface.

Firmware updates can be performed directly when the computer is connected to the Internet, allowing the application to access the latest available firmware. Alternatively, firmware files previously downloaded from the official DINUY website can be imported directly into the application for offline updates.

Developer website
http://www.dinuy.com

Version info
1.0.0.0

Available for
ETS6

MCP server for ETS. This app makes it possible to connect coding agents to ETS so they can add devices, modify parameters, edit and link group addresses and, when enabled, do bus operations. DCAs and plug-ins can't be accessed, but otherwise almost anything you could do from ETS UI to the current project is accessible to the agent. Also contains a built-in chat window you can use with your own API key to do agentic coding from directly within ETS. Tested most heavily with OpenCode, but works with any agent supporting MCP protocol.

Adding multiple devices according to documentation, tedious refactors and pretty much any other repetitive work become natural language prompts for the agent, freeing you to work on other tasks while the agent does most of everything that specific instructions can be written for. You can't work completely headless, because ETS doesn't allow an app to import or open a project, and some flows, like first download of a device, are controlled by ETS and show the familiar dialogs to the user. So you run a coding agent on your laptop, with filesystem access to read project specifications and have the project open in ETS with this app for the agent to connect to.

Always have a backup, but ETS undo history covers agent operations and bus access needs to be opted-in from UI, so if you don't quite trust your agent you can keep it off and trigger downloads manually.

If you hope to vibe-code KNX with this tool without knowledge of KNX programming, that might work, but with current models I wouldn't bet on it and support explicitly doesn't cover teaching KNX programming.

If, on the other hand, you know KNX well and you hope to end the horrible frustration of dragging objects in ETS, when you see how you could build at agent speed like you're used to elsewhere...this is the tool. I built this exactly because I felt the pain.

Developer website
https://vksystems.fi

Version info
1.1.0.0

Available for
ETS6