Shop

Reactivates the protocol EIBlib/IP in ETS (not standardised and since KNXnet/IP redeemed). With this ETS App the establishment of an ETS connection using with this protocol is again possible.

The Timberwolf Server has a few thousand universal objects, which are deactivated by default.
To be able to use a Group Object it has to be released by choosing its data type from a list in the application for the corresponding object. The group object may then be linked with Group Addresses.

The Timberwolf Importer App simplifies this process by uploading a control file containing Group Addresses with data type and optional Group Object numbers to be released. This control file can be exported from a Timberwolf Server or a WireGate Server or can be created by hand.

The Csv Importer (DCA) enables a simple and effective configuration of the KNX TP communication module CM8400 from Neuberger Gebäudeautomation GmbH.
The configuration can be exported or imported into a CSV file. Via the CSV file, the configuration can be synchronised with the AS project in PMC Studio or re-imported in another project. Thus a laborious configuration by hand is spared.

Exporting Data for EITT

ABB Building Planner Import

Area of application:

Devices can be maintained comfortably using the Steinel ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).

The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

The APP MDT RF + Range Check is a useful tool for the analysis and planning of KNX radio installations according to the new RF + standard.
The tool helps you to plan the installation location for new installations as well as to analyze and correct problems in existing radio installations. The MDT RF + Range Check shows you in a simple graphical matrix which connections are critical. Long-term analyzes are also possible to identify external interference sources.
The repeater functionality of the RF + devices can also be examined and evaluated with this tool.

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

With the “KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects.

With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.

“KNXMCM BAline Studio Exchange” can in each case be run for only one device.

If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.

The Weinzierl KNX Modbus Gateway ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl KNX Modbus RTU Gateway 886 database and import it into another gateway. This saves a tedious manual configuration.

ETS APP: JUNG KNX Secure Key Loader

Note:
JUNG supports you in building up know-how about KNX Secure! We cover the hardware and software measures offered by KNX Secure in webinars. After successful completion you can receive a voucher that reduces the purchase price of this app. Further information is available at: www.jung.de/contact-knx-secure

Content:
In order to securely integrate the scanned device certificates into the ETS, the installer transfers the JSON files created with the JUNG KNX Secure Scanner to his computer. Several files can come together there, which he archives and imports into the ETS project using the ETS app JUNG KNX Secure Key Loader. This extension is available via the KNX Association App-Shop and is bound to the ETS dongle. The installation is performed via the App menu in the main menu of ETS 5 Professional.

The Weinzierl Modbus TCP Gateway 716 ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl Modbus TCP Gateway 716 database and import it into another gateway. This saves a tedious manual configuration.

With the Weinzierl KNX Modbus RTU Gateway 886.1 ConfigTool a so-called DCA (Device Configuration AddIn) is available for the ETS. With this it is possible to export the configuration of a Weinzierl KNX Modbus RTU Gateway 886.1 database and to import it into another gateway, thus saving a tedious configuration by hand.

The KNX Specifications cover all technical topics of the KNX Standard, from the first contact with the KNX technology, through the specification, certification rules and testing, and application descriptions. The different Volumes and Parts are clearly separated, and intended for the various responsibilities within a company.

Content of the KNX Handbook

1. Primer
2. Guide for Development
3. System Specifications
4. Hardware Specifications and Tests
5. Certification
6. Profiles
7. Application Descriptions
8. System Conformance Tests
9. Standardised Components & Devices and Tests
10. Application Domain specific Standards

PLEASE NOTE: this is the public version (2.1) of the KNX Specification which already dates back a number of years. KNX Members have access in their MyKNX account to the very latest version of the KNX Specifications, which is currently v3.0.3. This version is updated at regular intervals with the latest evolutions of the parts, volumes and application notes.

With the ETS App Replace Device, you can replace KNX devices while keeping their Group Addresses. This is possible for devices with similar functionality, regardless of the manufacturer.

The ETS App Extended Copy is used to quickly create similar structures in a project. During the copy process, a dedicated dialog will allow devices, bus lines, even complete building parts together with their destination address assignments, configuration, Group Addresses, links, text descriptions and other information to be adjusted. Thereafter, the configuration is inserted seamlessly.

Project Data Exchange helps you to transfer ETS project data like topology, Group Addresses and building structure by exporting and importing
* between ETS projects
* between ETS and other tools (e.g. CAD programs)
The current app version works only from ETS 5.7.2! The app is available for ETS6.

For full system visualisation, telegrams shall be allowed to pass the line coupler. To this end, a dummy device is inserted in the ETS project. It contains all the Group Addresses required by the visualisation system. The ETS takes the Group Addresses from the dummy device into account when creating the filter tables.

Fill VisualizationDummy helps you to link a dummy device in the ETS with a list of Group Addresses for a visualization.
Product data for dummy devices can be obtained from several manufacturers.

The information about the group addresses can be read either from a file (different formats are supported), or the group addresses can be selected from the current ETS4 project by drag and drop.
The current app version works only from ETS 5.7.2! The app is available for ETS6.

This ETS App is intended to exchange Group Address information of Busch-ComfortTouch® panels from Busch-Jaeger or ABB between ETS and IPP. The ETS App provides IPP data with recent changes in ETS and vice versa ETS data in IPP. By pressing the import button you can import XML files that were created by IPP into ETS. Using the export button you can generate an XML file for import into IPP.

To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC". This export functionality provides only basic information about the KNX installation. The NETx BMS App is a user-friendly way to import the whole KNX project and its meta-information into the NETx BMS Server or the NETx KNX OPC Server. The output of this ETS App is an enhanced export file that contains the used KNX Group Addresses, the deployed KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and Group Objects) as well as the building and trade view. In addition, the App detects the configured IP addresses of the KNXnet/IP routers and interfaces. Based on the topology of the KNX project, the App automatically assigns the KNX Group Addresses to the routers and interfaces that are later on used for accessing them. Thus, a manual, time-consuming and error-prone assignment of the KNX Group Addresses to the KNXnet/IP routers and interfaces is not necessary anymore. Using the NETx BMS App, the whole KNX project including the well-known ETS view can be imported into the NETx BMS Server or NETx KNX OPC Server in a fast and intuitive way.

Siemens offers the possibility to exchange data from SIMATIC S7 PLC to KNX systems via KNXnet/IP interfaces. This ETS App enables the user to export a Group Address data (Main addresses 0-15) from ETS in a CSV file which can be imported to Siemens KNX2S7 Editor. The additional available KNX2S7 Editor creates required data for SIMATIC S7.

Simply pre-plan a smart home with Terminal (http://www.terminal-konfigurator.de): Transfer your pre-planned KNX project to ETS in seconds via the Terminal app. Automatically create the building structure and group addresses and save a lot of effort. With one click, Terminal also generates a specification sheet for you and you always have the total price in view.

Now you can also work offline: Now you can also use the Terminal app in locations without Internet access with the new offline import.

Easily import changes: Especially in the pre-planning phase, you need to react flexibly. Now you can easily import changes into your existing ETS project.

The KNX RF Field Strength Analyzer (KNX-RF-FSA) app is taking the innate uncertainty of KNX RF installations. By gathering the Received Signal Strength Indicators (RSSI) of all user-selected RF devices and displaying them in a colour-coded matrix, the KNX-RF-FSA makes testing and debugging of KNX RF device connections easier than ever before. Designed to be used for short and long-term observations of the device’s RSSIs, the KNX-RF-FSA is a high-quality tool that can highlight any weaknesses in a KNX RF installation. This tool also tests the functionality of activated repeater for increased area coverage to avoid future problems. The RF FSA is all you need for successfully commissioning your KNX RF installation. Available in MyKNX.

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS5 Professional is required.

The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. Compared to the standard NETx BMS App, the NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

‘eConfigure KNX Student’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://ecobuilding.schneider-electric.com/products/light-and-room-control/knx-system/econfigure-knx-lite/technical-documentation#tab/documents

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

Griesser offers innovative configuration options. Using a tile system, functions are «stacked» according to their priority. This is similar to the list of priorities in a requirements specification.
Despite the high degree of flexibility, no programming language has to be learned because the intuitive tiles are configured in the predefined and tested scope. Each tile also contains «its own» communication objects and specific settings options.
After successful configuration, the functionality can be tested online and the individual statuses of each tile can be graphically visualized.

The app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.

The functions are:
Update - Changes the application program to a later or earlier version while retaining current configurations.
Convert - Transfers / adopts a configuration from an identical or compatible source device.
Channel Copy - Copies a channel configuration to other channels on a multi-channel device.
Channel Exchange - Exchanges configurations between two channels on a multi-channel device.
Import / Export - Saves and reads device configurations as external files.

With the WAREMA KNX SMI multiple actuators in surface-mounted or DIN rail-mounted housing, up to 16 SMI LoVo drives can be controlled independently of one another or in up to 16 groups. The manual override operation and status display of the binary inputs via the Bluetooth App and DCA App is unique and, additionally, operation is possible on the actuator itself. Commissioning and motor search/allocation is done via smartphone or the ETS DCA App. This app can also be used to read out and acknowledge the SMI Motor error list or to learn in tilt pulses.

https://youtu.be/EiAx1fra4ME

This application describes the supervision of a KNX installation for the "Energeasy connect by Rexel" home automation box. Ideal for housing and small tertiary.

The principle is simple:
1 / Set up your KNX installation with ETS5 (topology, addition of participants, settings, assignment of individual addresses and groups ...).

2 / The App then allows you to:
Describe the parts and equipment of your project (eg living room lamp, kitchen shutter, etc.).
KNX / IP gateway scanner.
Generate a .XML file describing the project configuration.

3 / Import the .XML into energeasy connect, allowing control via the E.Connect 2 application.

www.energeasyconnect.com/support/nous-contacter

A plugin of configuration DALI bus deveice by KNX bus

DCA for commissioning the DALI devices and for setting their parameters for the DALI/KNX Gateway DA64-230/KNX REG, Part No. 93302

This app is used to import the KNX configuration file for the GM/A 8.1 KNX Security Panel into ETS. Importing the KNX configuration file enables all relevant group objects of the KNX Security Panel in ETS. This app is not needed for general device settings or for device programming (download).

The ETS app "BJE Firmware Update 2.0" serves for updating the firmware of different Busch-Jaeger KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

The ETS app "ABB Firmware Update 2.0" serves for updating the firmware of different ABB KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

This DCA enables the KNX panel 8" from JUNG to be commissioned. With the seperate software JUNG KNX SMART PANEL DESIGNER the KNX-Panel 8" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the JUNG KNX SMART PANEL DESIGNER.

With the KNXtool-App you can import all KNXtool project information such as your devices, building structure, topology, group addresses and functions (complete with all relevant channel text, ID’s, Tags, etc.) directly into ETS.

The KNXtool is a comprehensive web based KNX design and planning tool which allows you to design, plan, manage, budget and document KNX system installations using one single software.
The KNXtool uses a drag-and-drop interface so you can graphically design and plan KNX projects with speed and accuracy.

ETS stands for Engineering Tool Software; a manufacturer independent configuration software tool to design, configure and diagnose intelligent home and building automation installations based on KNX.

ETS is a software, which runs on Windows© platform based computers.

Compatible with Windows 10 and 11.
**The product can either be licensed via cloud or dongle.

ETS stands for Engineering Tool Software; a manufacturer-independent configuration software tool to design and configure intelligent home and building control installations with the KNX system. ETS is a software, which runs on Windows platform-based computers.

This version is intended for private usage for those wanting to design and program their own home with KNX using the classic ETS software user interface already known for many years. You may create one single project containing a maximum of 64 KNX products from any KNX manufacturer.

By ordering this product you implicitly confirm that you are aware that the ETS6 Home is a license type that only allows the creation of one single KNX project with maximum 64 devices. The license type is intended for technical savvy persons or home owners that collaborate together with a skilled KNX installer

Maximum of 64 KNX devices in one single project.
Intended for private usage only
Compatible with Windows 10/11
Only available as cloud license
No dongle provided for this product

KNX Gateway for IR Configuration App is a plugin of configuration the KNX Gateway for IR,Flush mounted/Ceiling by KNX bus

This DCA enables the KNX IQ08 TPS from DIVUS GmbH to be commissioned. With the separate software DIVUS VISION for Windows the KNX IQ08 TPS can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the DIVUS VISION for Windows.

This DCA Version A enables the KNX panel 7" Version A from Feller to be commissioned. Via the ConfigTool Version A the KNX-Panel 7" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

This DCA enables the KNX-Panel 7" Version B from Feller to be commissioned. Via the ConfigTool Version B the KNX-Panel 7" version B can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS6 Professional is required.

For easy configuration of the Modbus KNX Gateway MG/S 11.100.1.1. With this DCA, the mapping of the Modbus KNX data points of a server can be exported as a reusable template. The DCA can also be used to import ready-made device templates from a database.

A plugin of configuration DALI bus deveice by KNX bus

ESTADA is your planning software for easy, fast and intuitive planning of KNX projects. Plan your project with a graphical drag & drop interface in no time without tedious work in ETS.
With ESTADA, getting started with KNX is easier than ever as it takes care of all the parameterization and eliminates the need to work in ETS. Ideal for newcomers who do not want to complete an ETS course and highly appreciated by KNX professionals who want to rapidly plan complex KNX projects.

The plan-related user interface allows a clear planning of all consumers and their connection with actuators and scenes to complete functions. Not only a fast and clear planning is guaranteed, but also a reliable documentation. Function lists, component lists and room plans enable a seamless transfer of the planning phase to the execution. Of course, planning with several members is also possible.

Export the entire project as a project file directly to ETS or synchronize your planning progress directly with our ETS app.

KNX has never been easier!

‘eConfigure KNX Student’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://ecobuilding.schneider-electric.com/products/light-and-room-control/knx-system/econfigure-knx-lite/technical-documentation#tab/documents

DALI-2 System Config Tool(Hereinafter referred to as DCA) is a plugin of the ETS software for configuring DALI gateway, embedded in the application of DALI gateway, to conveniently debug and configure function of DALI gateway, and address DALI device.

Area of application:
With the ETS Service App, KNX Secure devices from Elsner Elektronik can be conveniently maintained. Use the programming interface of the ETS to:
- Import new firmware versions
- Transfer older firmware versions, e.g. when replacing a device.
The ETS Service App supports all KNX media (TP, IP, RF).