Shop

This App is needed for configuration of the Control4 C4-KNX-SUAC Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.41 in the project can be processed at the same time. The download into the device is done by normal ETS download.

o Device Configuration App (DCA) for SIEMENS KNX/DALI Gateways N 141/14 & N 141/32
o Order nr.: 5WG1141-1AB14, 5WG1141-1AB32
o The fully ETS-integrated Device Configuration App (DCA), which complements the standard parameter dialog, is used for DALI commissioning and DALI testing with the KNX/DALI Gateways N 141/14 and N 141/32. This allows for the identification, addressing, and assignment of DALI operating devices and DALI-2 sensors using the familiar ETS environment, without needing additional software besides ETS.
o For more information about DCA installation, please refer to the application program description on https://www.siemens.com/knx-td

The KNX Specifications cover all technical topics of the KNX Standard, from the first contact with the KNX technology, through the specification, certification rules and testing, and application descriptions. The different Volumes and Parts are clearly separated, and intended for the various responsibilities within a company.

Content of the KNX Handbook

2. Guide for Development
3. System Specifications
4. Hardware Specifications and Tests
5. Certification
6. Profiles
7. Application Descriptions
8. System Conformance Tests
9. Standardised Components & Devices and Tests
10. Application Domain specific Standards

PLEASE NOTE: this is the public version (3.0.0) of the KNX Specifications. KNX Members have access in their MyKNX account to the very latest version of the KNX Specifications, which is currently v3.0.3. This version is updated at regular intervals with the latest evolutions of the parts, volumes and application notes.

GPT available in ChatGPT store: GPT - KNX Specifications Navigator

Disclaimer
This GPT-based assistant is provided as an aid for individuals and companies interested in developing KNX solutions based on the KNX Specifications. It is currently in a testing phase and should not be considered a definitive or authoritative source of information.
While this assistant aims to provide guidance based on the KNX Specifications v3.0 and the KNX Development Guide, users are strongly advised to verify all technical details, processes, and compliance requirements against the official KNX documentation.
The KNX Standard and its specifications are complex, and incorrect interpretations may lead to development errors or non-compliance with KNX certification requirements. For the most accurate and up-to-date information, always refer to the original KNX Standard documents (available to KNX Members) and consult KNX Association resources when necessary.
By using this assistant, you acknowledge that it is provided "as is" without any warranties, and the responsibility for verifying the information remains with you.

KNX Association also offers the latest version of the KNX Tutor Course Documentation on paper. The KNX Tutor Course Documentation consists of the following chapters:

• KNX Requirements for Training Centres
• Structure and Scope of KNX Association
• KNX Software
• History of Bus Systems
• Serial data transmission & KNX Protocol
• Microcontrollers
• Application program
• KNX Certification Scheme for products

The KNX Advanced Course Documentation consists of the following chapters:

• Fail-safe planning
• Flags
• Heating
• Integrated applications
• Interworking
• Coupler
• Lighting Control
• Security Technology
• Logic Operations
• Visualisation systems
• ETS Apps
• KNX & Multimedia
• KNX and Smart Metering/Smart Grid

This App is needed for configuration of the ABB SUG/U 1.1 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.1 in the project can be processed at the same time. The download into the device is done by normal ETS download.

This App is needed for configuration of the BJE 6186/40 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All 6186/40 in the project can be processed at the same time. The download into the device is done by normal ETS download.

KNX Virtual is a Windows application representing a KNX installation, i.e. it is not a physical installation but it behaves like one.

The advantage is that no investment in hardware (i.e. KNX power supply, KNX/USB interface or KNX/IP interface, KNX devices) needs to be made in order to test and play with KNX & ETS.

KNX Association also offers the latest version of the KNX Tutor Course Documentation on paper. The KNX Tutor Course Documentation consists of the following chapters:

• KNX Requirements for Training Centres
• Structure and Scope of KNX Association
• KNX Software
• History of Bus Systems
• Serial data transmission & KNX Protocol
• Microcontrollers
• Application program
• IP Communication
• KNX Certification Scheme for products

This app is required to configure the Theben AC IR gateway. With the help of the app, the manufacturer of the split unit and the model of the remote control are loaded into the ETS application.
All Theben AC IR Gateways in the project can be edited simultaneously. The download into the device is then carried out via the normal ETS download.

ESTADA is your planning software for easy, fast and intuitive planning of KNX projects. Plan your project with a graphical drag & drop interface in no time without tedious work in ETS.
With ESTADA, getting started with KNX is easier than ever as it takes care of all the parameterization and eliminates the need to work in ETS. Ideal for newcomers who do not want to complete an ETS course and highly appreciated by KNX professionals who want to rapidly plan complex KNX projects.

The plan-related user interface allows a clear planning of all consumers and their connection with actuators and scenes to complete functions. Not only a fast and clear planning is guaranteed, but also a reliable documentation. Function lists, component lists and room plans enable a seamless transfer of the planning phase to the execution. Of course, planning with several members is also possible.

Export the entire project as a project file directly to ETS or push your planning progress directly with our ETS app.

KNX has never been easier!

Create and Link Group Addresses allows you to quickly create group addresses from selected communication objects of devices such as blind or shutter actuators based on a defined naming scheme. The communication objects are automatically linked to the corresponding group addresses, making the creation of actuators in projects significantly faster than using spreadsheets, copy & paste, or manual setup.