Shop ETS Apps

This DCA Version A enables the KNX panel 7" Version A from Feller to be commissioned. Via the ConfigTool Version A the KNX-Panel 7" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

This DCA enables the KNX-Panel 7" Version B from Feller to be commissioned. Via the ConfigTool Version B the KNX-Panel 7" version B can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

Device Configuration App (DCA) for Ekinex KNX/DALI gateway EK-BF1-TP-D1 (1 channel) or EK-BF1-TP-D2 (2 channels)
Order No.: EK-BF1-TP-D1 DALI2 1CH, EK-BF1-TP-D2 DALI2 2CH
Application: APEKBF1TPD1_V1.1.0, APEKBF1TPD2_V1.1.0

Coloured light control including device type 8 ECGs
Colour temperature (DT-8 Sub-Type Tc)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
DT-8 Sub-Type PrimaryN is not supported.

DCA App to configure the Ekinex KNX/DALI-2 Smart Gateway EK-BI1-TP-D1 device.

KNX2GO connects your ETS project with the KNX2GO smartphone app – locally, securely and without a laptop on the bus. The ETS add-in shares the lines you select from the open project over a token-protected network access; every result flows straight back into the project. ETS stays the leading data source – your phone becomes the tool in the field.

What KNX2GO does:

• Assign individual addresses on site – the app writes them back into the ETS project automatically.
• KNX Secure: scan the device FDSK, the certificate goes straight into the project.
• Start the application download remotely – from the app, with a live progress bar.
• Live topology diagram: areas, lines, segments and couplers with medium colours (TP/IP/RF/PL/IoT); missing couplers shown instantly.
• Selective sharing: the phone only sees the lines you release.
• Commissioning / acceptance report as PDF: topology check, device list with status and "X of Y devices properly commissioned" – ready to sign.
• Pair via QR code or manually; "Renew token" revokes existing access anytime.
• Bilingual (DE/EN), follows the ETS language automatically.

100 % local. No cloud service, no transmission to the provider or third parties – everything stays in your network, protected by a pairing token.
Requirements: ETS 6 · Windows · KNX2GO smartphone app on the same local network.

With the “WAREMA KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects.

With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices.

“KNXMCM BAline Studio Exchange” can in each case be run for only one device.

If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.

With the KNXtool-App you can import all KNXtool project information such as your devices, building structure, topology, group addresses and functions (complete with all relevant channel text, ID’s, Tags, etc.) directly into ETS.

The KNXtool is a comprehensive web based KNX design and planning tool which allows you to design, plan, manage, budget and document KNX system installations using one single software.
The KNXtool uses a drag-and-drop interface so you can graphically design and plan KNX projects with speed and accuracy.

With the ETS App Labels, device labels based on forms can be printed as stickers. The information (Individual Address, mounting, function, etc.) is taken directly from the ETS project. This not only facilitates the work of the installer or system integrator, but also provides consistent overview within distribution boards and cabinets. Please note that an installed version of Microsoft Word is needed for printing the labels.

An ETS-App for importing configuration results via LeanConnect e.g. out of the ZVEH eConfigurator.
Complete your configuration there and then use this App to turn it into an ETS6 Project.